A Finite Element Method (FEM) mesh is converted to a reluctance network through an original magnetostatic formulation based on face shape functions. This meshed reluctance network is coupled with an standard one, characterizing a 0D system. Both approaches are fully-compatible and the hybridized problem can be solve with a single circuit solver. The approach is tested in 2D on a magnetic circui...

O. Chivu, C. Rontescu, D-T. Cicic, Polytechnic University of Bucharest, Romania This paper presents the results of the practical trials carried out based on the calculation assumptions considered within the FEM of the reconditioning by welding of a crankshaft used in the automotive industry. For the validation of the analytical model it was considered the influence of the crankshaft fixing poss...

In this paper, a modification on the fixed grid finite element method is presented and used in the solution of 2D linear elastic problems. This method uses non-boundary-fitted meshes for the numerical solution of partial differential equations. Special techniques are required to apply boundary conditions on the intersection of domain boundaries and non-boundary-fitted elements. Hence, a new met...

The finite element method (FEM) is used to study the influence of porosity and pore shape on the elastic properties of model porous ceramics. The Young’s modulus of each model was found to be practically independent of the solid Poisson’s ratio. At a sufficiently high porosity, the Poisson’s ratio of the porous models converged to a fixed value independent of the solid Poisson’s ratio. The Youn...

build full size prototypes and test and measure the stresses (with strain gauges, etc) A general overview of the use of the Finite Element Method (FEM) is given. It describes how FEM supplements industry use FEM. design codes when dealing with non-standard shapes or The first mentioned choice is on one hand risky and on the complex loading conditions. It covers the reasons for the use other may...

A three dimensional vector finite element method (FEM) has been used to model the permittivity of rice using the scattered far field radiation. Scattering of incident plane wave radiation is analysed to extract the permittivity of granular material. Some reduced parameters obtained from the scattered electric field show a very good correlation with the permittivity of materials (both dielectric...

To solve crack problems, some coupled methods have been developed in recent years. Most of these methods have some shortcomings such as the need for a transition region. The finite element and enriched element free Galerkin methods are widely used for this class of problems. In order to take the advantages of these methods while avoiding the disadvantages, it is essential to follow solution app...

This research introduces an advanced forging method to produce the door frame of the wind turbine tower. The advantage of the new forging method is the increase of raw material utilization ratio and the energy saving. In the conventional method, the door frame is hot forged with a hydraulic press and machined out lots of material because of the big difference between forging shape and final mac...