The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such...

Nanofluids are engineered colloids composed of nano-size particles dispersed in common fluids such as water or refrigerants. Using an electrically controlled wire heater, pool boiling Critical Heat Flux (CHF) of Alumina and Silica water-based nanofluids of concentration less than or equal to 0.1 percent by volume were measured. Silica nanofluids showed CHF enhancement up to 68% and there seems ...

 This work presents a model for calculating the effective ‎thermal conductivity of nanofluids. The proposed model ‎includes the effects of nanoparticles and thermal conductivity ‎base fluid.We will focus on experimental of the volume ‎concentration parameter and temperature on thermal ‎conductivity, nano-fluid combination and Multi-Walled ‎Carbon nanotubes-Oxide / Copper-paid deionized Water. T...

Nanofluids are stable suspensions of nanoparticles in conventional heat transfer fluids (base fluids) that exhibit better thermal characteristics compared to those of the base fluids. It is important to clarify various aspects of nanofluids behavior. In order to identify the thermal and hydrodynamic behavior of nanofluids flowing through non-circular ducts, in the present study the laminar flow...

The enhancement of the thermal performance of Vacuum Tube Solar Collectors (VTSC) was studied by using alumina nanofluid as working fluid. VTSC is a simple and commonly utilized type of collector. This study established the heat transfer experimental model of all glass VTSCs used in a forced-circulation solar water heating system using alumina nanofluid as base fluid. Al2O3 (with an average par...

The paper presents results of rheological experiments on viscosity under anisotropic pressure and in electric field of diethylene glycol-based MgAl2O4 nanofluids. Nanofluids have been prepared in a two-step method. The dynamic viscosity of nanofluids with various mass concentrations of nanoparticles was measured in the range of shear rates from 10 s -1 to 1,000 s -1 in constant temperature unde...

Homogeneous and stable magnetic nanofluids containing γ-Fe2O3 nanoparticles were prepared using a two-step method, and their thermal transport properties were investigated. Thermal conductivities of the nanofluids were measured to be higher than that of base fluid, and the enhanced values increase with the volume fraction of the nanoparticles. Viscosity measurements showed that the nanofluids d...

Nanoparticle suspensions (nanofluids) have been recommended as a promising option for various engineering applications, due to the observed enhancement of thermophysical properties and improvement in the effectiveness of thermal phenomena. A number of investigations have been reported in the recent past, in order to quantify the thermo-fluidic behavior of nanofluids. This review is focused on e...

Received Feb 7, 2017 Revised Apr 5, 2017 Accepted Apr 29, 2017 Trends in the field of nanomaterial-based transformer oil show most of the conducted works have focused only on the transformer oil-based nanofluids but limited studies on the stability of transformer oil-based nanofluids. Since mineral oil-based nanofluids still can produce the sedimentation, thus the cold-atmospheric pressure plas...

Gold/1-butyl-3-methylimidazolium hexafluorophosphate (Au/[Bmim][PF6]) nanofluids containing different stabilizing agents were fabricated by a facile one-step chemical reduction method, of which the nanofluids stabilized by cetyltrimethylammonium bromide (CTABr) exhibited ultrahighly thermodynamic stability. The transmission electron microscopy, UV-visible absorption, Fourier transform infrared,...