oxides of nitrogen are the major emission from a diesel engine. it is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of no is promoted. various techniques are therefore employed to reduce the nox emission like egr, scr, etc. in this present work a rotating injector is a tec...

background: knowing the rate of overlapping in results obtained from information retrieval tools is important to prevent waste of time. medical and health-related information has an outstanding place among the variety of information available on the internet. hence, this research aimed to study the rate of overlap among medical search results derived from mesh (medical subject headings) in gene...

the present study analizes a trigeneration system based on an internal combustion engine and a steam ejector refrigeration system from an energy point of view.

The purpose of present paper is simulation a direct injection stratified charge natural gas engine. The KIVA-3V code was used for gaseous fuel injection simulation. Compression and expansion stroke of engine cycle is simulated using KIVA-3V code. In cylinder fuel equivalence ratio distribution criterion is used for studying mesh independency. The results show that 550000 cells number is suff...

at the present work, the effect of cold exhaust gas recirculation (egr) on combustion and pollution of a dual fuel engine has been investigated by cfd code fire. the turbulent flow within the combustion chamber is simulated using the k-ε turbulence model, which is modified for engine flows. “wave” and “eddy break up” models are employed to predict combustion and spray process. the calculations ...

In this article, the failure of a heat exchanger during its operation in the marine environment has been analyzed. This heat exchanger was used for cooling the oil in a marine diesel engine. Based on the existing failure history, damages in engine components were observed after 89 hours of engine working due to the leakage of the sea water to the oil. For the objective of the failure analysis, ...

Increasing current vehicle development trends for small, light, front wheel drive vehicles with low idle speeds have been forced automotive industries to use hydraulic engine mounts for further improvement in vibration, noise and harshness (NVH) performance of the vehicles. However, with the development of modern vehicle designs such as hybrid vehicles and variable engine management systems whi...

The purpose of this study is to investigate the effect of injection parameters on a heavy duty diesel engine performance and emission characteristics. In order to analyze the injection and spray characteristics of diesel fuel with employing high-pressure common-rail injection system, the injection characteristics such as injection delay, injection duration, injection rate, number of nozzle hole...

A regenerative organic Rankine cycle (RORC) is modeled and optimized for the use of waste heat recovery from a prime mover (PM). Three PMs including, a diesel engine, a gas engine, and a microturbine are selected in this study. Four refrigerants including isobutane, R123, R134a, and R245fa are selected. The nominal capacity of the PM, PM operating partial load, turbine inlet pressure, condenser...

Changing the compression ratio and presence of turbocharger are two important issues, affecting on performance, and exhaust emissions in internal combustion engines. To study the functional properties and exhaust emissions in regards to compression ratio at different speeds, the numerical solution of the governing equations on the fluid flow inside the combustion chamber and the numerical solut...