We use aerosol techniques to investigate the cohesive and granular properties of solids composed of colloidal semiconductor nanocrystals (quantum dot solids). We form spherical agglomerates of nanocrystals with a nebulizer and direct them toward a carbon substrate at low (~0.01 m/s) or high (~100 m/s) velocities. We then study the morphology of the deposit (i.e., the "splat") after impact. By v...

In this study, we offer a general view at the area of fuzzy modeling and fuzzymodels, identify the visible development phases and elaborate on a new and promisingdirections of system modeling by introducing a concept of granular models. Granularmodels, especially granular fuzzy models constitute an important generalization of existingfuzzy models and, in contrast to the existing models, generat...

Silos are structures that are used for storing different types of granular material. Dynamic behavior of silos under seismic loads is very complex. In this paper seismic behavior of steel silos with different height to diameter ratios is investigated by considering granular material-structure interaction using ABAQUS finite element package. Silo wall is modeled by shell elements and its behavio...

The wide-gap aluminothermic rail welds with root opening of 50-70 mm were produced using plain carbon steel rail and non-alloy aluminothermic charge. Mechanical properties and micro-structure of the weld metal and HAZ as well as the impact energy and the fracture toughness of the welds were investigated. The yield and tensile strength of wide-gap welds were about 98% and 95% of the base metal, ...

The interlayer bonding strength is an essential property of geogrid-reinforced asphalt. To study the characteristics asphalt, direct shear and oblique tests were carried out in laboratory. interlaminar asphalt was lower than that unreinforced carbon–carbon sample highest, second, carbon–glass lowest. stiffness geogrid affects strength. strengths AC-20C samples higher AC-13C samples. almost same...

Two granular sludge sequencing batch reactors (GSBR) with alternating anoxic/aerobic (R1) and anaerobic/aerobic (R2) conditions were operated with a 4-carbon-source synthetic influent. The physical properties of the granular sludge were very good (SVI ≈ 20 mL g−1) and high solid concentrations (up to 35 g L−1) were obtained in the bioreactor operated with a pre-anoxic phase with additional nitr...

The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried hazelnut shells by specific method carbonisation and water steam activation at 950oC for 2 h. The granular activated carbon produced from hazelnut shells has a high specific...

Fe-TiO2 on granular activated carbon support was synthesized via hydrothermal method without calcination. The crystalline phases were identified using X-ray diffraction whereas the surface morphologies were examined using scanning electron microscopy. Peaks of anatase TiO2 and graphite were present in the Fe-TiO2-GAC sample. Comparisons of the surface features of GAC and Fe-TiO2-GAC show that F...