A population balance model is considered for the description of mass transfer in liquidliquid dispersions in a mechanically agitated vessel operated continuously. The dispersions considered are of low dispersed phase fraction in which coalescence processes may be assumed to be negligible. The model incorporates the dynamic nature of breakage processes among the droplet population together with ...

A pore-scale model is developed to simulate mass transfer between two fluid phases in a porous medium. The approach uses a network description of the pore space and builds on explicit tracking of the fluid-fluid interfaces in the pore network. Mass transfer is computed as local mass fluxes across each interface, and transport equations are solved in the pore network by a characteristic method. ...

In this article, stream flow effectivness is based on hydraulic network studied in the shell-side of a shell and tube heat exchange as a case study. For an appropriate heat exchangers rating design to meet a specified duty, it's better to consider each stream flow separately. Using the hydraulic network principals, a set of the correlations for calculating different stream flow rates in the cro...

Infrared thermography was used to measure heat transfer by radiation and the surface temperature of starlings (Sturnus vulgaris) (N=4) flying in a wind tunnel at 6-14 m s-1 and at 15-25 degrees C. Heat transfer by forced convection was calculated from bird surface temperature and biophysical modelling of convective heat transfer coefficients. The legs, head and ventral brachial areas (under the...

Title of Document: HIGH-PERFORMANCE TUBULAR EVAPORATOR UTILIZING HIGH ASPECT RATIO MANIFOLD MICROCHANNELS Vibhash Chandra Jha, Doctor of Philosophy, 2012 Directed By: Michael Ohadi, Professor Department of Mechanical Engineering Heat recovery using absorption chillers has not been economical for small scale applications due to high capital requirements and heavy weight/volume as deterring facto...

The performance of the adsorption cooling system is assessed in terms of the heat transfer coefficients of adsorbent bed heat exchanger. These parameters in-turn determine the specific cooling capacity (SCC) and the coefficient of the performance (COP) of the adsorption cooling system. It was observed that the overall heat transfer coefficients of the heat exchanger have a direct linear relatio...

Separation of formic, acetic, and propionic acids from the aqueous stream using membrane solvent extraction has been studied using three different membrane contactors made of polysulfone (PS), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) using two different solvents; including ethyl acetate (EA) and diisopropyl ether (DIPE). The efciency of the membrane and e...