Palladium nanoparticles supported on multi-walled carbon nanotubes (Pd/MWCNTs) have been synthesized using a modified polyol reduction method and its performance in methanol oxidation reactions has evaluated. The morphology of palladium on MWCNTs was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic performance of synthesized catalyst ...

The objective of this study was to develop a supported tri-metallic catalyst (nano-Ni-La-Fe/γ-Al2O3) for tar removal in biomass steam gasification, to significantly enhance the quality of the produced gas. For this purpose, the supported tri-metallic catalysts were prepared by a deposition-precipitation (DP) method. Different analytical approaches were used to characterize the synthesized catal...

Multiwalled carbon nanotube-supported Pt (Pt/MWNT) nanocomposites were prepared by both the aqueous solution reduction of a Pt salt (HCHO reduction) and the reduction of a Pt ion salt in ethylene glycol solution. For comparison, a Pt/XC-72 nanocomposite was also prepared by the EG method. The Pt/MWNT catalyst prepared by the EG method has a high and homogeneous dispersion of spherical Pt metal ...

Pt-Pd catalyst supported on nitrogen-doped carbon nanofiber (N-CNF) was prepared and evaluated as a cathode electrode of the direct methanol fuel cell (DMFC). The N-CNF, which was directly synthesized by the catalytic chemical vapor deposition from acetonitrile at 640 °C, was verified as having a change of electrochemical surface properties such as oxygen reduction reaction (ORR) activities and...

The hydroisomerization of pure n-pentane over H-mordenite supported Pt-catalyst was investigated in a fixed bed reactor by changing reaction parameters such as temperature, pressure, and WHSV, as well as the H2/HC ratio. The maximum yield of isopentane over Pt/mordenite catalyst was achieved at 220 °C and a relatively low reaction pressure. To address the effect of feed composition on the catal...

The new highly active supported vanadium-magnesium catalyst (VMC) has been studied in α-olefin (1-butene, 1-hexene)/ ethylene copolymerization in the presence of hydrogen. Data on the effect of α-olefin/ethylene ratio in copolymerization on the content of branchings in copolymers, kinetic profile, copolymer yield, molecular weight and molecular weight distribution of copolymers have been obtain...

One of the problems in removing pollutants from water  by photocatalytic methods is the separation of the catalyst from the solution. In this study, the catalyst stabilization method was used to solve this problem. Nano ZnFe2O4 supported on Copper Slag (CS) produced in this research is an environment-friendly, simple and cost-effective catalyst. ZnFe2O4</su...

a series of fe3o4 supported on mesoporous fdu-12 silica systems were prepared by the hydrothermal conditions. the surface properties of the functionalized catalyst were analyzed by a series of characterization techniques like ftir, xrd, n2 adsorption–desorption and tem. xrd and adsorption–desorption analysis shows that the mesostructure of fdu silica remains intact after fe3o4 modifications, wh...

ru/al2o3 catalysts were prepared by conventional incipient wetness impregnation as well as colloid deposition of rucl3 precursor via in situ reduction with ethylene glycol (polyol) method on alumina support. the samples were characterized by tem, xrd and tpr techniques. the catalytic performance tests were carried out in a fixed-bed micro-reactor under different operating conditions. ethylene g...