Additive manufacturing has been adopted to process nickel‑titanium shape memory alloys due its advantages of flexibility and minimal defects. The current layer-by-layer method is accompanied by a complex temperature history, which not beneficial the final characteristics alloys. In this study, continuous directed energy deposition proposed improve microstructure uniformity. spatial characteriza...

recently, offshore and ocean engineering have been dealing with novel materials that play a significant role in reducing the weight of structures used in the ship construction industry. 5xxx series of aluminum alloys are of the novel alloys are suitable for construction of ship hulls and the topside structures of offshore platforms. within different 5xxx aluminum alloys, aa5083 is of great impo...

among different spd techniques, equal channel angular pressing has attracted the most attentions,because of applying large strain to solid bulk materials. in this research, ecap process up to 6passes was carried out on a pure copper and a 6012 al-mg-si alloy with bc route in ecap dieswith φ=120 and ψ=20 and diameter of 20and 10 millimeter respectively. moreover, x-raydiffraction (xrd) system wa...

The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...

SiC reinforced Aluminum samples were produced by stir casting of liquid AA1200 aluminum alloy at 600-650oC casting temperature. 83μm SiC particles were rinsed in 10g/l, 20g/l and 30g/l molar concentration of Sncl2 through cleaning times of 0, 60, 120, and 180 minutes. Some cast samples were tested for mechanical properties and some were subjected to heat treatment before testing. The SnCl2 rins...

The conjoint influence of welding and artificial aging on mechanical properties were investigated for extrusions of aluminum alloy 6063, 6061, and 6005A. Uniaxial tensile tests were conducted on the aluminum alloys 6063-T4, 6061-T4, and 6005A-T1 in both the as-received (AR) and as-welded (AW) conditions. Tensile tests were also conducted on the AR and AW alloys, subsequent to artificial aging. ...

this paper investigates the earing phenomenon in deep drawing of aa3105 aluminum alloy, experimentally and numerically. earing defect is mainly attributed to the plastic anisotropy of sheet metal. in order to control such defect, predicting the evolution of ears in sheet metal forming analyses becomes indispensable. in this regard, the present study implements the advanced yield criterion bbc20...