The authors have been developing a crack propagation analysis system that can deal with arbitrary shaped cracks in threedimensional solids. The system is consisting of mesh generation software, a large-scale finite element analysis program and a fracture mechanics module. To evaluate the stress intensity factors, a Virtual Crack Closure-Integral Method (VCCM) for the second-order tetrahedral fi...

X-Ray Diffraction Contrast Tomography (DCT) is a recently developed, non-destructive synchrotron imaging technique which characterizes microstructure and grain orientation in polycrystalline materials in three dimensions (3D). By combining it with propagation based Phase Contrast Tomography (PCT) it is possible to get a full picture description for the analysis of local crack growth rate of sho...

Total-energy pseudopotential calculations are used to study the cleavage anisotropy in silicon. It is shown that cracks propagate easily on 111 and 110 planes provided crack propagation proceeds in the <1;10> direction. In contrast, if the crack is driven in a <001> direction on a 110 plane the bond breaking process is discontinuous and associated with pronounced relaxations of the surrounding ...

The corrosion fatigue crack growth characteristics of small (>35pm) surface and corner cracks in aluminum alloy 7075 is established. The early stage of crack growth is studied by performing in situ long focal length microscope (500X) crack length measurements in laboratory air and 1% NaCl environments. To quantify the “small crack effect” in the corrosive environment, the corrosion fatigue crac...

Interfacial fracture toughness and cyclic fatigue-crack growth properties of joints made from 99.5% pure alumina partially transient liquid-phase bonded using copper/niobium/copper interlayers have been investigated at both room and elevated temperatures, and assessed in terms of interfacial chemistry and microstructure. The mean interfacial fracture toughness, Gc, was found to decrease from 39...

The mechanisms of fatigue-crack propagation are examined with particular emphasis on the similarities and differences between cyclic crack growth in ductile materials, such as metals, and corresponding behavior in brittle materials, such as intermetallics and ceramics. This is achieved by considering the process of fatiguecrack growth as a mutual competition between intrinsic mechanisms of crac...

In order to monitor the crack tip propagation of aluminum alloy, this study investigates the variation of the spectrum characteristics of a fiber Bragg grating (FBG), combined with an analysis of the spectrum simulation. The results identify the location of the subordinate peak as significantly associated with the strain distribution along the grating, corresponding to the different plastic zon...

Shear failure models have traditionally dominated the research on slab avalanche initiation in snow science, but evidence has accumulated that they tell us only part of the story. In these models weak snowpack layers are regarded as compounds of zero thickness, but in reality they often consist of ice grain aggregates of finite thickness and high porosity. When such granular aggregates fail, th...

A traction-displacement relationship that may be embedded into a cohesive zone model for microscale problems of intergranular fracture is extracted from atomistic molecular-dynamics simulations. A molecular-dynamics model for crack propagation under steady-state conditions is developed to analyze intergranular fracture along a flat Σ99 [1 1 0] symmetric tilt grain boundary in aluminum. Under hy...