The results of a numerical study of the nonlinear response of thin unstiffened aluminum cylindrical shells with a longitudinal crack are presented. The shells are analyzed with a nonlinear shell analysis code that accurately accounts for global and structural response phenomena. The effects of initial crack length on the prebuckling, buckling and postbuckling responses of a typical shell subjec...

A comparison of the buckling analysis of the nanoplate and nanocomposite plate with a central square hole embedded in the Winkler foundation is presented in this article. In order to enhance the mechanical properties of the nanoplate with a central cutout, the uniformly distributed carbon nanotubes (CNTs) are applied through the thickness direction. In order to define the shape function of the ...

Carbon nanotube (CNT) has attracted enormous attention from researchers since its discovery in 1991. Due to their remarkable mechanical properties, carbon nanotubes have been employed in many diverse areas of applications including biological probes, atomic force microscopy and also in nanocomposites. However, similar to any of the many man-made construction materials used today such as steel a...

In this paper, the modified Euler-Bernoulli beam model is presented to examine the influence of surface elasticity and residual surface tension on the critical force of axial buckling of nanotubes in the presence of rotary inertia. An explicit solution is derived for the buckling loads of microscaled Euler beams considering surface effects. The size-dependent buckling behavior of the nanotube d...

This paper presents a method and procedure of sensing and determining critical shear buckling load and corresponding deformations of a comparably large composite I-section using strain rosettes and displacement sensors. The tested specimen was a pultruded composite beam made of vinyl ester resin, E-glass and carbon fibers. Various coupon tests were performed before the shear buckling test to ob...

In some simple two-dimensional structures it is sufficient to determine only the lowest value of the load at which buckling commences. However, in the case of shells, it may be also necessary to investigate the postbuckling behavior because it has an important bearing on the magnitude of the failure load. The importance of the postbuckling behavior, which the small deflection theory of buckling...

In this paper, tests on flexural buckling ( Lateral – Torsional ) of cold-formed steel(CFS) lipped Channel beams under restrained boundary conditions are described Two point loading for flexural tests have been established for 3.0m span to obtain uniform bending moment. The section sizes selected for testing are 100x50x10 mm, 100x50x15 mm and 100x50x20 mm with 1.6mm and 2.0mm thickness for the ...

In this research, effect of opening on the buckling of FMLs (Fiber Metal Laminate) is studied. Samples are made of a laminate, epoxy resin reinforced with four layers of woven basalt fibers, inserted between two Al plates. Different samples are prepared, tested and studied; one group without opening and the other two groups with circular openings of radii 10 and 20 mm. In all samples buckling i...

The mechanics of a fascicle insertion into the skin by a mosquito of the type aedes aegypti has been studied experimentally using high-speed video (HSV) imaging, and analytically using a mathematical model. The fascicle is a polymeric microneedle composed of a ductile material, chitin. It has been proposed that the mosquito applies a non-conservative follower force component in addition to the ...

A nanoindentation system was employed to characterize mechanical properties of silicon nanolines (SiNLs), which were fabricated by an anisotropic wet etching (AWE) process. The SiNLs had the linewidth ranging from 24 nm to 90 nm, having smooth and vertical sidewalls and the aspect ratio (height/linewidth) from 7 to 18. During indentation, a buckling instability was observed at a critical load, ...