Abstract The strain variation during the isothermal holding under constant stress was studied in quenched or annealed Ni5 1 Ti 4 9 alloy samples. found both samples and this completely recovered on subsequent unloading heating. This allowed to conclude that caused by martensitic transformation. It maximum value of depended heat treatment. equal 0.5 % sample it 6 sample. assumed formation Ni 3 p...

In this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. In numerical study, single and two-phase models have been used. In single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. Effects of volume fraction a...

This is the report clarifying orientation dependence of wear behavior Co–Cr–Mo alloy. The resistance alloy with face-centered cubic (fcc) structure was found to be higher on planes in order {110}, {001} and {111}. Quantitatively, {110} 1.5 times larger than that tendency showed coincident surface hardness, as empirically suggested. However, we additionally observation worn fcc-single crystals v...

Nanofluid is prepared through the nanoscale particles suspended in a fluid base and Nanotechnology is a new attempt to investigate the thermal sciences. As a result of huge investment in developed countries on nanotechnology, research on thermal properties of nano-fluids is of particular interest.Due to the usage of nanotechnology to reduce energy waste, in this project CeO2 with EG is used to ...

The effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volume fraction of martensite (Vm) under different heat treatments was investigated. The heat treatments were homogenized at 1200 oC along with several subsequent normalizations at 910 oC, resulting in different microstructures and mechanical properties. After heat treatment, the obtained ste...

In the present paper, the effect of water-CuO nanofluid on the radiator heat transfer of an automobile, Peugeot 405 XU7 engine type is investigated experimentally. The experiments are carried out for the radiator water (water-ethylene glycol with a volume fraction of 80-20, respectively) as a base fluid and water-CuO nanofluid with the volume fraction of 0.5% and 1%. Sodium Dodecyl Sulfate (SDS...

In this paper, a general electrokinetic theory for concentrated suspensions in salt-free media is derived. Our model predicts the electrical conductivity and the electrophoretic mobility of spherical particles in salt-free suspensions for arbitrary conditions regarding particle charge, volume fraction, counterion properties, and overlapping of double layers of adjacent particles. For brevity, h...

This study has primarily aimed at the examination of the effect of flow rate, solid volume fraction and their interactions on the Nusselt number of Al2O3/water nanofluids. To investigate the main and interaction effects on the response, Response Surface Methodology (RSM) has been used based on the miscellaneous design. By using the analysis of variance (ANOVA) the signi...