This investigation presents the effect of various parameters on foam stability and its rheological properties. The underlying idea of this experiment is generating of drilling foam with uniform bubbles. The main problem of foam using is controlling its stability during field application. The most important parameters which cause Instability in foam are gravity drainage, gas diffusion and bu...

The goal of this study was improvement of sandy soil using a combination of polystyrene foam container waste and Portland cement. For this purpose, Babolsar sand was used as the base soil. Strips of disposable polystyrene foam container waste in “chips” of 50 ´ 5 mm and 50 ´ 10 mm were added to the soil at 0.0%, 0.1%, 0.2% and 0.3% by weight along with 3% Portland cement at a relative density o...

Flotation is the most important process for concentrating mineral ores. This process may occur in any vessel such as column flotation, which has been used widely during the last decade and the conventional flotation cells. The effect of superficial feed velocity on the copper recovery was investigated using pilot-scale column flotation of "Sarcheshmeh Capper Complex". The results were compa...

AbstractThe purpose of this study was to investigate the controllable operating parameters influence, including pH, solid content, collector, co-collector, and depressant dose, and conditioning time, on apatite flotation kinetics. Four first order flotation kinetic models are tested on batch flotation time-recovery profiles. The results of batch flotation tests and the fitting of first-order ki...

abstract: this paper presents the results of studies concerned with the preparation of fresh food foams based on egg white and various hydrocolloids including iranian gum tragacanth, guar and xanthan gums at different concentrations (0.002-0.040% w/w). the basic physical parameters of the obtained foams such as overrun, stability and morphology of gas bubbles were measured. viscosity measuremen...

The recovery and concentrate grade, used simultaneously, are the most widely accepted measures of assessing metallurgical performance. Meanwhile, new challenges are being found with more complex ores around the world, a new methodology to evaluate flotation circuits more accurately is used to keep the Mineral Industry afloat in a changing world by increasing revenues. The flotation process is d...

The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

Foam injection is widely applied in amounts of fields to drilling, production, and formation protection. Sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. Therefore, it is necessary to seek ways for improving the performance of foam injection. An increased disturbance to the stratum, like the vibration caused by a seismic o...