the use of solar collectors in combination with heat pipes is rapidly growing in recent years.heat pipes, as heat transfer components, have undeniable advantages in comparison with other alternatives. the most important advantage is their high rate of heat transfer at minor temperature differences. although there have been numerous studies on the heat analysis or first thermodynamic analysis of...

Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

In this work\ a comparative investigation of jet impingement and microchannel cooling is presented[ The thermal performance of each technology evaluated at the respective optimal condition is compared to each other with the target dimension as a main parameter[ It is revealed that the microchannel cooling is preferable for a target dimension smaller than 9[96 by 9[96 m\ while the jet impingemen...

helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. in this kind of heat exchangers, flowand heat transfer are complicated. this paper reports a numerical investigation of theinfluence of different parameters such as coil...

an investigation has been carried out on the temperature of a biscuit on the cooling line of razavi food industries company. for thispurpose, the time variations of biscuit’s top surface temperature in traveling from oven to packing station on the conveyor packing station by conveyors has been studied. the fourier field equation for transient heat transfer is used as the basis for the determini...

Abstract Heat treatment simulation of inductive surface hardening large bearing rings is a challenging multi-physical task. Besides the determination material and process parameters induction heating, quenching must be modelled to obtain realistic results concerning depth as well information about residual stresses distortions rings. A common method model processes determine heat transfer coeff...

In this study, by using the finite volume method, the heat transfer in a convective straight fin with temperature-dependent thermal properties and an internal heat generation under multi-boiling heat transfer modes are analyzed. In this regard, the local heat transfer coefficient is considered to vary within a power-law function of temperature. In the present study, the coexistence of all the b...

the performance of a γ-al 2 o 3 /n-decane nanofluid shell-and-tube heat exchanger in a biomass heating plant is analyzed to specify the optimum condition based on the maximum heat transfer rate and performance index for wide range of nanoparticle volume fraction (0–7%). compared with pure          n-decane, the obtained results in this research show that by using γ-al 2 o 3 /n-decane nanofluid ...

if an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. this mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. howeve...

The turbulent pulsating flow and heat transfer in straight 90° curved square pipes are investigated this study. Both experimental temperature field measurements at the cross-sections of conjugate (CHT) simulation were performed. steady was compared to under same time-averaged Reynolds number. number flow, as well approximately 60,000. Womersley 43.1, corresponding a 30 Hz frequency. Meanwhile, ...