This paper is an experimental study on the behavior of vertical shear link in the single and double configurations. There have been three specimens selected for examining the effects of different details .The first specimen was an I section with no stiffener, while the second specimen composed of I section with stiffeners designed according to AISC 2005. Third specimens were composed of two I s...

Received: November 02, 2017 Revised: January 12, 2018 Accepted: January 17, 2018 Abstract: Introduction: Retrofit interventions are often performed by introducing in structures dissipative devices able to improve the global seismic response particularly in terms of energy dissipation capacity. In the case of Concentric Braced Steel Frames (CBF), these devices are generally introduced in the for...

An experimental campaign on joints of x-braced frames is presented. Tests are performed on strap-gusset joints and lower and upper corner joints. Many different phenomena and failure modes are observed in these tests. However, it is possible to see that only one failure mode can be accepted if a good seismic performance of the frame needs to be guaranteed: the net section failure of the diagona...

response modification factor (r-factor) is one of the seismic design parameters to consider nonlinear performance of building structures during strong earthquake. relying on this, many seismic design codes led to reduce earthquake loads imposed to the structure. the present paper tries to evaluate the r-factors of conventional concentric braced frames (cbfs) and special moment frames (mrfs) in ...

The design and behavior of a ductile structural system called a knee-braced moment frame are presented in this paper. The design of this structural system is based on a capacity-design concept that results in ductile behavior. The knee part is a fuse-like component that dissipates energy by the formation of plastic flexural and/or shear hinges at its ends and mid-span, when the building is subj...