Ballistic electron emission microscopy has been used to study thin aluminum oxide tunnel junction barriers formed both by magnetron sputter deposition and thermal evaporation. We have found that the barriers made by oxidation of evaporated Al become fully formed at a significantly thinner mean deposited thickness ~;6 Å! than junctions made by sputter deposition. The effective barrier height of ...

A low voltage argon ion sputter technique was used to form grain boundary junctions in YBa2Cu307-, thin films on MgO. The YBa2Cu307--x thin film grown on a pre-sputtered region of MgO was rotated 45’ about the [OOl] axis relative to the YBa.&!u,O,-, thin film grown on an adjacent unsputtered region of the substrate. YBazCu,07-. thin films were grown using pulsed organometallic beam epitaxy (POM...

s of chapters xviii 1 Overview of sputter-deposited TiNi based thin films 1 Abstract 1 1.

Active metals can be used as a getter pump, removing impurities in ultra-pure high vacuum environments. To relieve the difficulties involved with the transportation, storage and handling of these metals, a process is being developed to create a protective coating by removing the active metal component from the surface of a mixture of the active metal and a stable element via immersion in a wet ...

A self-consistent kinetic particle-in-cell model has been developed to describe a radiation driven plasma. Collisions between charged species and the neutral background are represented statistically by Monte Carlo collisions. The weakly ionized plasma is formed when extreme ultraviolet radiation coming from a pulsed discharge photoionizes a low pressure argon gas. The presence of a plasma close...

The individual impacts of slow (300 eV/amu) highly charged Xe ions induce nanometer sized pitlike structures on the KBr (001) surface. The volume of these structures shows a strong dependence on the ions potential energy. Total potential sputter yields from atomically flat (001) terraces are determined by imaging single ion impact sites. The dependence of the sputter yield on the ions initial c...

Background and aims. Er:YAG laser irradiation has been claimed to improve the adhesive properties of dentin; therefore, it has been proposed as an alternative to acid etching. The aim of this in vitro study was to investigate the shear bond strength of an etch-and-rinse adhesive system to dentin surfaces following Er:YAG laser and/or phosphoric acid etching. Materials and methods. The roots of ...

Deep reactive ion etching (DRIE) of borosilicate glass and profile control of an etched groove are reported. DRIE was carried out using an anodically bonded silicon wafer as an etching mask. We controlled the groove profile, namely improving its sidewall angle, by removing excessively thick polymer film produced by carbonfluoride etching gases during DRIE. Two fabrication processes were experim...

A novel self-cleaning polymer composite with self-healing ability to self-repair after chemical and mechanical damage using readily available materials like polydimethylsiloxane (PDMS) and camphor soot particles is developed. With the optimal loading of the camphor soot particles, the composite coating on glass and stainless steel surfaces reveals self-cleaning properties with a water contact a...