A new anti-corrosion compound, Melamine Formaldehyde (MF), was formulated by the addition of proper amount of formaldehyde to melamine under specific conditions. This compound was mixed with a novel nano powder, which was extracted from corn cob ash containing SiO2 particles, in order to improve its corrosion inhibition efficiency. This inhibitor provides a high level of protection f...

Prediction of SCC risk of austenitic stainless steels in aqueous chloride solution and estimation of the time to failure as a result of SCC form important and complicated topics for study. Despite the many studies reported in the literature, a formulation or a reliable method for the prediction of time to failure as a result of SCC is yet to be developed. This paper is an &#10effort to investig...

This paper experimentally investigates the cyclic inelastic performance of concentrically braced frames with and without cold formed steel stud ~CFSS! infills designed to laterally restrain braces and delay their buckling. Specimens have either diagonal tube or solid bar braces with and without CFSS and U brackets providing out-of-plane and in-plane buckling restraint. Behavioral characteristic...

Tensile-shear testing results are influenced not only by the quality of spot welds, but also by the dimensions of testing specimens. Experimental and numerical studies have been conducted on determining critical sizes for tensileshear testing of resistance spot welded specimens. Statistical methods have been employed, from planning stages to the analysis of results, for the purposes of getting ...

This paper presents the field testing results of an autonomous manipulator-based robotic system that strips the paint and rust from steel bridges [Liu et al., 2008]. The key components of this system are sensing and planning, which have been presented in other research papers. The grit-blasting field trial presented in this paper spanned 6 weeks, and included 20 hours over 4.5 days of actual gr...

Abstract: To ensure the rail transportations safety, evaluation of fatigue behavior of the rail steel is necessary. High cycle fatigue behaviour of a rail steel was the subject of investigation in this research using fracture mechanics. Finite element method (FEM) was used for analyzing the distribution of the stresses on the rail, exerted by the external load. FEM analysis showed that the ...

Recently, bulk nano-structured materials produced by severe plastic deformation (SPD) have attracted scientists attention.  Materials produced by SPD are of great importance because of (1) non-porous structure, (2) great mechanical properties such as high strength and toughness and (3) proper dimension for mechanical and physical testing.  Several methods have been introduced for imposing the s...

In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...

In some austenitic stainless steel welds grains orientations cause deviation and splitting of the ultrasonic beam. It is especially true in the case of multipass welds when the remelting process after each pass causes complex solidification process. With the new model MINA (Modelling anisotropy from Notebook of Arc welding) we show that we are able to predict thoroughly grains orientations. Thi...