In this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3D finite element modeling and experimental tests. The structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...

A finite element solution based on equevalent elements is proposed for the static and dynamic analysis of tallhigh tensioned cable antennas. To reduce high number of degrees of freedom in space frame body of a structure, a simple equivalent beam element is defined for each simulative substructure. This numerical procedure is applicable to analyze complex three dimensional assemblies of substruc...

Introduction As integrated optical devices become more sophisticated, so does the experimentation and analysis required to design them. By augmenting conventional experiments with rigorous computer modeling we can lower costs, shorten schedules, and provide faster, more accurate predictions. Discrete modeling codes using finite differences or finite elements are the most general, albeit expensi...

This research introduces an advanced forging method to produce the door frame of the wind turbine tower. The advantage of the new forging method is the increase of raw material utilization ratio and the energy saving. In the conventional method, the door frame is hot forged with a hydraulic press and machined out lots of material because of the big difference between forging shape and final mac...

abstract: compaction under tractors tires is of special concern because the weight of these machines has increased dramatically in the last years. these machines and others associated with crop cultural practices weight enough to significantly compact the soil, especially if the soil is soft with high moisture content during tilling, planting, or harvesting. the stress distribution and the size...

the aim of this study was to determine the effect of trenched zirconia bar on the von mises stress distribution of ips -empress ii core ceramics.the three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. the model was reinforced with zirconia bar (zb), zirconia bar with vertical trench (vzb) and zirconia bar with horizontal trench (hzb) ...

an interface part is used between clutch pedal and clutch cable in peugeot, samand, rd and peugeot pars. this part is consisted of two pieces. the main body is made of polyamide 6.6 and the second part is made of ck45.due to the fact that the two pieces are made of different assembling geometry with respect to each other, therefore, has caused performance problems which may result in clutch cab...

hydroforming process in one of the most effective production method, for improving the drawing ratio in sheet metal forming process. this is due to the fact that in hydroforming process, forming takes place using a punch which drives the part forward via a controlled fluid pressure. in this paper, deep drawing hydroforming for circular punch is investigated. different pressure paths are tested ...

for the nonlinear analysis of structures using the well known newton-raphson method, the tangent stiffness matrices of the elements must be constructed in each iteration. due to the high expense required to find the exact tangent stiffness matrices, researchers have developed novel innovations into the newton-raphson method to reduce the cost and time required by the analysis. in this paper, a ...