adsorption and desorption behavior of gd(iii) ionon macroporous weak acid resin (mwar) had been investigated.the influence of operational conditions such as contact time, initial concentration of gd(iii) ion, initial ph of solution and temperature on the adsorption of gd(iii) ion had been examined. experimental data were exploited for kinetic and thermodynamic evaluations related to the adsorpt...

the adsorption and desorption properties of sqd-85 resin for cu(ii) had been investigated. a series of experiments were conducted in a batch system to assess the effect of the system variables, i.e. initial ph, contact time and temperature. the results show that the optimal ph for the adsorption was 5.99 in the hac-naac system, and the maximum adsorption capacity was estimated to 324 mg/g at 29...

The adsorption of malonic acid on the rice bran was studied under various conditions such as temperature, contact time, adsorbent dose and concentration of adsorbate. Batch adsorption experiments were conducted and the result showed that the adsorption was dependent on all these parameters. The adsorption process obeys the Langmuir and Freundlich adsorption isotherms. The adsorption capacity wa...

A series of superporous carboxymethylcellulose-graft-poly(acrylamide)/palygorskite (CMC-g-PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-to...

The purpose of this study was to identify the key factors involved in patulin adsorption by heat-inactivated lactic acid bacteria (LAB) cells. For preventing bacterial contamination, a sterilization process was involved in the adsorption process. The effects of various physical, chemical, and enzymatic pre-treatments, simultaneous treatments, and post-treatments on the patulin adsorption perfor...

unmodified zeolites show little affinity for anions due to the fact that their surfaces are negatively charged. however modification of zeolites with amines turns their negative surface charge to positive and creating higher adsorption capacity for anions. in this study, polyaniline-clinoptilolite composite was prepared by polymerization of anilinium on the surface of zeolite. the composite was...

introduction: arsenic is known as a carcinogenic compound in drinking water . it can cause acute and chronic effects on human health. in this study, the effect of polyamidoamine dendrimer generation 3(pamam g3) as adsorbents for removal of arsenic (v) from aqueous solutions was evaluated.     methods: adsorption experiment was studied in batch system and the effect of different variables like p...

In this study pre-combustion capture of carbon dioxide from hydrogen was performed using a 5A zeolite adsorber. A one column thermal pressure swing adsorption (TPSA) process was studied in the bulk separation of a CO2/H2 mixture (50:50 vol%). The adsorption dynamics of the zeolite bed were investigated by breakthrough experiments to select the suitable range for operational factors in the desig...

A continuous-flow adsorption/desorption process for the recovery of phenolic compounds (PCs) from olive mill wastewaters (OMWs) was developed in a 0.53 m packed column, using a previously selected resin (Amberlite XAD16) and an actual OMW. The goals of the study were (i) to optimize the OMW pre-treatment step, (ii) to optimize the resin packing procedure, (iii) to evaluate the PC adsorption/des...

In this research, SBA-15/Polypyrrole (SBA-15/PPy) mesoporous nanocomposite was synthesized, characterized and applied for Acid Blue 62 (AB62) adsorption as a textile dye from aqueous solution. In order to evaluate the structural properties of synthesized adsorbent, FT-IR, FESEM and TEM images, XRD, and BET techniques were applied. Some parameters such as pH, dosage, and time which affect the ba...