The goal of this work is to predict ductile failure pipe-ring notched AISI 316L specimens, where notches mimic the geometry corrosion defects. Uncoupled damage models are used that end. Johnson-Cook and Lou-Huh criteria calibrated. uncoupled calibrated using experimental results from testing specimens. Calibration was achieved a hybrid experimental-numerical approach. Six notch shapes studied. ...

Metal Fused Deposition Modelling is a promising multi-step process able to manufacture metal parts by means of low-cost additive technique. In this study, metal-polymer composite filament characterized homogenous mixture AISI 316L sinterable powders and multi-component polymeric matrix was used fabricate samples FDM printer. A 2 4 full factorial design experiments elaborated define the possible...

The aim of the current work was to analyse impact salt bath nitriding on behavior tribological characteristics and surface microstructures AISI 316L stainless steels. Nitriding carried out at 580°C for 10 h. tribological, structural before after compared. microstructures, characteristics, as well its hardness, were investigated using optical microscopy (OM), X-ray diffractometer (XRD), profilom...

Influence of formation of surface nano/ultrafine structure using deep rolling on plasma nitriding and tribological properties of the AISI 316L stainless steel was investigated. Initially, the deep rolling process was carried out on the bar-shaped specimens at 15 cycles with 0.2 mm/s longitudinal rate and 22.4 rpm bar rotation. Then, plasma nitriding treatment was applied on the as-received...

This paper is an attempt to synthesize nanostructured tantalum films on medical grade AISI 316L stainless steel (SS) using pulsed DC plasma assisted chemical vapor deposition (PACVD). The impact of duty cycle (17-33%) and total pressure (3-10 torr) were studied using field emission scanning electron microscopy (FESEM), grazing incidence x-ray diffraction (GIXRD), nuclear reaction analysis (NRA)...

Carbonitride (CNx) coatings have existed for several decades but are not well understood. Related studies have indicated that CNx coatings exhibit behaviors comparable to diamond-like carbon (DLC) coatings. Metal-doped CNx coatings are expected to show superior performance to single CNx coatings. In this study, a CNx coating and a group of CNx coatings with 6 at. % metal doping (W, Ti, Zr, or C...

The plastic co-deformation behavior at the homophase interfaces between the hard nanotwinned grain inclusions and the soft recrystallized matrix grains in a duplex-microstructured AISI 316L austenitic stainless steel is examined through the analysis of long-range orientation gradients within the matrix grains by electron backscatter diffraction and transmission electron microcopy. Our analysis ...

Mechanical properties of machined components are controlled by inducing phase transformations in the outer layer of the materials. Induction hardening is one such manufacturing process where the surface hardness is enhanced while the core is retained with the original structure and characteristics. In this study, a mathematical model had been developed to predict the hardness and the volume fra...