The unique and exceptional physical properties of carbon nanotubes have inspired their use as a filler within a polymeric matrix to produce carbon nanotube polymer composites with enhanced mechanical, thermal and electrical properties. A powerful method of synthesising nanofibers comprising these polymer composites is electrospinning, which utilises an applied electric stress to draw out a thin...

Potentially low-cost continuous carbon fibers are produced from solvated mesophase pitch through a patented meltblowing process. The structural evolution and properties of the fibers are characterized by various analytical methods. The meltblown fibers are continuous fibers which are collected into a fibrous web form, and the diameter of the filaments is attenuated by the flow rate of air strea...

In this paper we investigate impact and compression after impact properties of plain weave carbon fiber sandwich composites. Impact tests were conducted on different sample types to obtain information about absorbed energy and maximum impact force. The different samples consisted of foam-filled and hollow honeycomb cores with four-layer carbon fiber facesheets on one or both sides. The impact a...

Electrode materials are key components for fiber solar cells, and when combined with active layers (for light absorption and charge generation) in appropriate ways, they enable design and fabrication of efficient and innovative device structures. Here, we apply carbon nanotube yarns as counter electrodes in combination with CdSe nanowire-grafted primary electrodes (Ti wire) for making fiber and...

The presented paper contains a brief review on the synthesis and characterization of silica aerogels and its nanocomposites with nanofibers and fibers based on a literature study over the past twenty years and my own research. Particular attention is focused on carbon fiber-based silica aerogel nanocomposites. Silica aerogel is brittle in nature, therefore, it is necessary to improve this drawb...

Generation of 5 ps, 32 pJ pulses from a carbon nanotube modelocked thulium fiber oscillator and their amplification to 0.6 W average power, 2.6 kW peak power, 13 nJ pulses by an LMA thulium fiber amplifier is discussed. ©2010 Optical Society of America OCIS codes: (140.3510) Lasers, fiber; (140.7090) Ultrafast Lasers;

Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...

BACKGROUND The radiopacity degree of posts is not enough for adequate visualization during radiographic analyses. Glass fiber post with stainless steel reinforcement has been fabricated in an attempt to overcome this limitation. AIM This study was designed to determine the influence of this metal reinforcement on the post mechanical properties. MATERIALS AND METHODS This study evaluated fle...

In the present study, traditional and hybrid composites were prepared by Hand lay-up molding and investigated. The composites constituents were unsaturated polyester resin as the matrix, 3% and 6% volume fractions of carbon fibers as reinforcement and 3% of Al2O3, Al, Cement and local Gypsum (calcium sulfate anhydrate CaSO4) as filler particles. The investigated physical properties were density...