 The repeatability and reproducibility (R&R) study—also called a gauge capability study—has been employed as part of the statistical process control program in many organizations. The objective of the study is to determine whether a measurement procedure or instrument is adequate for monitoring the performance of a process. The classical control chart method can be easily performed and ...

The most well-known uni-arribute control chart used to monitor the number of nonconformities per unit is the Shewhart type C-chart. In this paper, a new method is proposed in an attempt to reduce the false alarm rate in the C-chart. To do this, the decision on beliefs (DOB) concept is first uti [1] Corresponding author e-mail: [email protected]   lized to design an iterative method, where...

Problem statement: Although economic Xbar-R chart designs do guarantee the minimal operating cost, they typically have poor levels of statistical performance measures. The obvious limitation of the economic design is that the Type I error rate seems to be very high for many situations and will cause a large number of false alarms. This situation leads to an investigation of appropriate levels o...

the effects of the plant growth promoter gibberellic acid (ga3) and plant growth retardant chlormequat chloride (ccc) on biomass and quality of angelica dahurica var.formosana plants were investigated employing physiological and biochemical methods. plants were sprayed with ga3 or ccc at rosette stage and coumarin content was analyzed by high performance liquid chromatography (hplc) after harve...

Recently, feedforward controllers like zero phase error tracking controllers (ZPETC’s) and cross-coupled controllers (CCC’s) have been developed to effectively reduce tracking error and contouring error, respectively. This paper proposes an integrated controller which combines ZPETC and CCC to achieve both tracking and contouring accuracy. Furthermore, studies indicate that ZPETC and CCC can be...

We have developed algorithms and procedures for calculating daily sea ice thickness (SIT) and open water–sea ice (OWSI) charts, based on the Moderate Resolution Imaging Spectroradiometer (MODIS), ice surface temperature (IST) (night-time only), and reflectance (R) swath data, respectively. The resolution of the SIT chart is 1 km and that of the OWSI chart is 250 m. The charts are targeted to be...

Information graphics found in popular media contain communicative signals which help the viewer infer the graphic designer’s intended message. One signal is the relative effort required for different recognition tasks. This paper presents a model of the effort required to recognize a trend in a grouped bar chart. The model is developed using the ACT-R cognitive framework and validated via eye t...

Solubility data of refrigerant/lubricant mixtures have been modeled with a cubic equation of state. The systems studied are binary mixtures of hydrofluorocarbons (R-32, R-125, R-134a and R-143a) and alkylbenzene oils (viscosity grades 15 and 32). These partially miscible mixtures are well correlated with the present model, which can be used for calculating the pressure-temperature-composition r...

when a change occurs in a process, one expects to receive a signal from a control chart as quickly as possible. upon the receipt of signal from the control chart a search for identifying the source of disturbance begins. however, searching for assignable cause around the signal time, due to the fact that the disturbance may have manifested itself into the rocess sometimes back, may not always l...

Traditionally, the statistical quality control techniques utilize either an attributes or variables product quality measure. Recently, some methods such as three-level control chart have been developed for monitoring multi attribute processes. Control chart usually has three design parameters: the sample size (n), the sampling interval (h) and the control limit coefficient (k).The design parame...