In this study, the ability of lithium nitrite and amino alcohol inhibitors to provide corrosion protection to reinforcing steel was investigated. Two types of specimens-reinforcing steel and a reinforced concrete prism that were exposed to chloride ion levels resembling the chloride attack environment-were prepared. An autoclave accelerated corrosion test was then conducted. The variables teste...

Abstract—Corrosion inhibitors are widely used in concrete industry to reduce the corrosion rate of steel rebar which is present in contact with aggressive environments. The present work aims to using Zamzam water from well located within the Masjid al-Haram in Mecca, Saudi Arabia 20 m (66 ft) east of the Kaaba, the holiest place in Islam as corrosion inhibitor for steel in rain water and simula...

We outline the ability of zinc phosphate coatings, obtained by chemical conversion, to protect mild steel rebars against localized corrosion, generated by chloride ions in alkaline media. The corrosion resistance of coated steel, in comparison with uncoated rebars and coated and uncoated steel rebars embedded in mortar, were evaluated by open-circuit potential, potentiodynamic polarization, cro...

In this paper, a new kind of carbon steel (CS) and stainless steel (SS) galvanic sensor system was developed for the study of rebar corrosion in different pore solution conditions. Through the special design of the CS and SS electronic coupons, the electronic resistance (ER) method and zero resistance ammeter (ZRA) technique were used simultaneously for the measurement of both the galvanic curr...

Oxygen diffusion would not be important for healthy concrete. Once concrete is carbonated, however, oxygen diffusion is very crucial to lead reinforcement corrosion. Therefore, oxygen is always a potential threat of reinforcement corrosion in concrete and oxygen diffusivity is a material parameter for service life determination and durability designing of the concrete. One of the simple approac...

Microbially-induced concrete corrosion in headspaces threatens wastewater infrastructure worldwide. Models for predicting corrosion rates in sewer pipe networks rely largely on information from culture-based investigations. In this study, the succession of microbes associated with corroding concrete was characterized over a one-year monitoring campaign using rRNA sequence-based phylogenetic met...

Over the last decade, there has been an increasing interest in models for the evaluation and prediction of the condition of bridges in Canada due to their large number in an advanced state of deterioration. The models are used to develop optimal maintenance and replacement strategies to extend service life and optimally allocate financial and technical resources. The main process of deteriorati...

In this study, the effect of cement content on concrete performance in corrosive environments is investigated on concrete mixtures having the same water/cement (w/c) ratio. Three w/c ratios (0.40, 0.45 and 0.50) were used and for each w/c ratio three mixtures were prepared with cement contents 350, 400 and 450 kg/m3. The compressive strength, electrical resistivity and chloride diffusivity of t...

Predicting the corrosion initiation time of fresh concrete sewers by artificial neural network Guangming Jiang*, Zhiguo Yuan*, Philips Bond*, Jurg Keller* * Advanced Water Management Centre, QLD 4067, The University of Queensland, Australia