In this paper a new UWB textile slot antenna has been designed with high precision. This work aimed to makecloser steps towards real wearability by investigating the possibilities of designing wearable UWB antenna wheretextile materials are used for the substrate as well as the conducting parts of the designed antenna. The antenna iscomposed of three textile layers: the top and bottom are condu...

An axially corrugated horn antenna with an elliptically shaped taper is proposed for satellite communication applications. This structure is a good candidate for the feed of reflectors and also for improving the electrical properties of reflector antennas. A tapering method is used to justify the horizontal location of the corrugation profile which improves the electrical performance of the pre...

This paper presents finite element analysis of the strength of roadheaher conical picks. Failure forms of conical picks are investigated, and the FE model of conical pick is established which is based on ANSYS. The static analysis is carried out according to the load calculated by empirical formula and the deformation map and stress distribution is obtained. The results show that the maximum st...

A novel multiband multiple-input-multiple-output (MIMO) antenna system is proposed. The MIMO antenna system consists of two antenna elements, each of which comprises of three radiators: a driven monopole, an S-shaped strip and an inverted F-shaped strip and occupies footprint of 15x18.5x0.8 mm3 only. The driven monopole acts as a quarter-wave monopole and stimulate higher mode resonance. The tw...

A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...

Ti conical island structures were fabricated using photolithography and the reactive ion etching method. The resulting conical island structures were anodized in ethylene glycol solution containing 0.25 wt% NH4F and 2 vol% H2O, and conical islands composed of TiO2 nanotubes were successfully formed on the Ti foils. The conical islands composed of TiO2 nanotubes were employed in photoelectrodes ...

In this paper, crashworthiness characteristics of conical steel tubes stiffened by annular rings and rigid polyurethane foam are investigated. For this purpose, wide circumferential rings are created from the outer surface of the conical tube at some determined areas along tube length. In fact, this method divides a long conical tube into several tubes of shorter length. When this structure is ...

9 μW at the fundamental frequency of 1.09 THz, 15 0.98 and up to 27 lower frequencies 620–660 GHz have been demonstrated with double-resonant-tunneling-diode (RTD) patch-antenna oscillators. These parameters are substantially superior those previously reported for RTD oscillators, they close state-of-the-art level all other types oscillators around 1 THz. However, double-RTD also provide essent...

A finite element analysis is presented for sloshing and impulsive motion of liquid-filled conical tanks during lateral anti-symmetric excitation. The performed analyses led to the development of a number of charts which can be used to identify the natural frequency, the mode shapes of conical tanks for both fundamental and the cos(θ)-modes of vibration. Conical tank geometry was described with ...

a new multiple c- slotted microstrip patch antenna is proposed.  a patch antenna is a wide-beam narrowband antenna. microstrip patch antenna consist of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. the patch can be designed in any possible shape and normally made by conducting material copper or gold. this paper presents design of a c- slotted ...