Imidazolium salts are one of the most often used and investigated groups of ionic liquids (ILs). The research concerning their ecotoxicity comprised many test organisms representing different trophic levels; however, their impact on mixed cultures of microorganisms such as activated sludge has been hardly ever investigated. Thus, in this work, the effect of imidazolium ionic liquids on dehydrog...

Membrane fouling is considered to be the most serious drawback in wastewater treatment when using membrane bioreactors (MBRs), leading to membrane permeability decrease and efficiency deterioration. This work aims to develop an integrated methodology for membrane fouling control, using powdered activated carbon (PAC), which will enhance the adsorption of soluble microbial products (SMP) and imp...

Toxic compounds in sewage or industrial wastewater may inhibit the biological activity of activated sludge impairing the treatment process. This paper evaluates the Inhibition Capacity Index (ICI) for the assessment of activated sludge in the presence of toxicants. In this study, activated sludge was obtained from industrial treatment plants and was also synthetically produced. Continuous respi...

background and purpose: the performance of full-scale moving bed biofilm reactor (mbbr) was evaluated as an alternative for upgrading of kish island mirmohana wastewater treatment plant. in this study activated sludge process upgrade to mbbr process and different operating parameters were compared. materials and methods: effect of upgrading on different parameters such as organic loading rate (...

Microbial activity measurements (oxygen transfer rate, OTR, carbon dioxide transfer rate CTR and respiratory quotient, RQ) are used to monitor and control biological processes. In this study, the digestion of activated sludge in microaerobic conditions was evaluated. The changes of biological activity during digestion were monitored by respiration activity. The sludge mixtures used were primary...

the purpose of this study is the utilization of furfural residue for heating energy and activated carbon production. to evaluate the energy production of the residue, bulk density, melting point, and heating value were measured. furthermore, moisture, ash, volatile compounds, fixed carbon, lignin, and elements were determined. ash and volatile content average were measured at 15.4% and 68.9%, r...

The aim of the experiment was to analyze the particular processes (biomass synthesis, oxidation, denitrification and accumulation) during carbon removal from wastewater. The experiment was carried out in a sequencing batch reactor (SBR) in two series with different organic carbon compounds to nitrogen compounds ratio (COD/N). Organic carbon loading of activated sludge was 0.07 g COD/g·d. Organi...

A simple experimental set-up was used to study the treatability aspect of phenolic wastewater. Three types of systems: i) activated sludge (A.S), ii) granular activated carbon (A.C) and iii) activated sludge plus activated carbon (A.S + A.C) were experimented under different phenol loadings (100, 200 and 300 mg/l) and different flow rates (21.6 and 43.2 l/d) with initial COD concentration 500 m...

this study focus on the preparation of two supports including activated carbon derived from medlar and palladium nanoparticles loaded on activated carbon (pd-np-ac). subsequently, both adsorbent modified with a novel schiff base chelating agent and their potential applicability for determination of trace amounts of metal ions from aqueous solution has been investigated. the method is based on c...