This paper describes the testing of Profiled Steel Sheet Dry Board (PSSDB) load bearing wall system. Experimental tests were conducted on various PSSDB wall samples, with and without infill materials to study its effect on the PSSDB load bearing wall performance. A proprietary profiled steel sheet, Ajiya Cliplock (0.48 mm thick) attached to Cemboard (10 mm thick) on one side, and Cemplank (10 m...

Structural health monitoring (SHM) systems operate online and test different materials using ultrasonic guided waves and piezoelectric smart materials. These systems are permanently installed on the structures and display information on the monitor screen. The user informs the engineers of the existing damage after observing signal loss which appears after damage is caused. In this paper health...

The proportional relationships between the Charpy absorbed energy (CVN) and the KIC values have been established for a wide variety of steels. Several formulae have been proposed that predict KIC from CVN. The purpose of this study is to investigate, by means of compact testing fracture toughness specimens, the effective role of microstructure for estimation of the fractur...

Herein, Compact-Testing (CT ) and Charpy V-Notch (CVN) testing have been done on four Friction-Stir-Processed (FSPed) samples: BM (Base-Metal), FS (FSPed-Sample), FN5 (FSP Nano-ZrO2-coated/560 rpm rotational speed) and FN9 (FSP Nano-ZrO2-coated/900 rpm), to investigate the KIC and the dominant parameters on it for St 37 steel. Experiments are also surveyed and validated by ABAQUS. Results showe...

many efforts have been made to model the the hot deformation (dynamic recrystallization) flow curves of different materials. phenomenological constitutive models, physical-based constitutive models and artificial neural network (ann) models are the main methods used for this purpose. however, there is no report on the modeling of warm deformation (dynamic spheroidization) flow curves of any kin...

We evaluated friction fatigue-induced changes in the microstructure and residual stress of carburized steel. By eddy current testing (ET) x-ray diffractometry (XRD), voltage rate (after/before fatigue testing) obtained by ET had a strong correlation with retained austenite phase full width at half maximum XRD. The results are useful for analysis damage

an ultrafine grained dual phase (ufg dp) steel containing niobium was produced by a new routeutilizing simple cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex startingstructures. the effects of intercritical holding time on the microstructural evolutions and mechanicalproperties were studied. the results showed that increasing intercritical holding time enhnaced ...