Large amounts of rubber particles are dispersed into the environment due to tire wear. The rubber contains a wide range of chemicals, including several of environmental concern. The purpose of this thesis, which is based on six papers [I–VI], was to assess the ecotoxicological hazard and risk associated with tire wear particles, with a main focus on the aquatic environment. A method was develop...

It is uncommon for tire explosion related injuries on the lower extremity. The bilateral lower extremities were injured by tire explosion when the patient was seated in a bus. She sustained an open fracture with partial bone loss in the right calcaneus (a comminuted fracture in the right ankle joint) and a closed comminuted fracture in the left tibia and fibula. This damage was caused by uncont...

The behavior a pneumatic tire is analyzed and simulated using a finite element model. We calculate the elastic deformations in the contact area of a pneumatic tire touching the street for different friction conditions between tire and street. The simulations are compared with the experimental results. The comparison demonstrates that the overall deformation as well as the frictional behavior in...

Thispaper applies extended Kalman–Bucyfiltering (EKBF)and Bayesianhypothesisselectionto estimate motion, tire forces, and road coefficientof friction (p) of vehicle8on asphalt surfaces.The EKBFestimatesthe state and tire forcesof an eight-degree-of-freedomvehiclefrom vehicle-mountedsensors.The filter requiresno a prioriknowledgeof p and does not require a tire force model. Resultingforce, slip,...

We are studying a hydraulic system design and vehicle dynamic modeling for a development of tire roller system, because those are very important in analysis of tire roller. Generally, tire roller is one of the useful machines in a road construction field and it technically applied for many other construction fields. Also, we conceptualize of new hydraulic and traction system, and define about t...

Hydroplaning is a unique phenomenon in which the water on a wet runway or highway is not displaced from the nominal tire-ground contact area by a rolling tire or by a moving but nonrotating (full-skidding) tire at a rate fast enough to allow the tire to make contact with the ground surface over its complete nominal footprint area, as would the case of operation on a dry surface. When hydroplani...

This work presents a single-chip sub-mm3 wireless pressure sensor suitable for tire pressure monitoring. The dynamic behavior and safety of an automobile tire is closely dependent on its inflation pressure: maintaining the manufacturerrecommended pressure is essential to prevent tire failure, provide stability, improve fuel efficiency and tire-life, and to reduce CO2 emissions [1]. Thus, Tire-P...

The tread of a tyre consists of a profile (pattern of grooves, sipes, and blocks) mainly designed to improve wet performance and to inhibit aquaplaning by providing a conduit for water to be expelled underneath the tyre as it makes contact with the road surface. Testing different tread profile designs is time consuming, as it requires fabrication of a tyre set using the tread profile, followed ...

The subsurface defect in the wheel tread caused from Rolling Stock Fatigue (RCF) has become more danger in high speed railway. The conventional UT and phased array UT have deficiency to find the subsurface defect from the tread surface because of limitation of ultrasonic near field. In this paper, the subsurface defect is studied by simulation and experimental results with ultrasonic technique....

Two trends could be observed in the evolution of road transport. First, with traffic becoming increasingly intensive, motor infrastructure is developed; more advanced, greater quality, and durable materials are used; pavement laying repair techniques improved continuously. The continued growth number vehicles on accompanied by ongoing improvement vehicle design view towards controllability as k...