This paper deals with the level of detail that is necessary for representation of tread pattern in finite element tire models. Different methods for creation of tire tread mesh are systematized by two different criteria: the most common approaches and the finite element analysis type. Some of the representative approaches found in literature are given in more detail and their advantages and dis...

Tire dust is a significant pollutant, especially as a source of zinc in the urban environment. This study characterizes the morphology and chemical composition of heavy metal particles embedded in tire dust and traffic-related materials (brake dust, yellow paint, and tire tread) as measured by a field emission scanning electron microscope equipped with an energy dispersive X-ray spectrometer (F...

To produce thin grooves in the tread portion of tires, tire molds contain a multitude of sipes, which are thin metal inserts that project into the tread rubber during molding and curing. The geometric design and location of sipes is based on tire performance as well as appearance. A completèfamily' of tires, typically consisting of a dozen or more tire sizes with similar tread designs, will req...

Tire-tread material has a zinc (Zn) content of about 1 wt %. The quantity of tread material lost to road surfaces by abrasion has not been well characterized. Two approaches were used to assess the magnitude of this nonpoint source of Zn in the U.S. for the period 1936-1999. In the first approach, tread-wear rates from the automotive engineering literature were used in conjunction with vehicle ...

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Yi Xiong Name of the doctoral dissertation In-plane Tire Deformation Measurement Using a Multi-Laser Sensor System Publisher School of Engineering Unit Department of Mechanical Engineering Series Aalto University publication series DOCTORAL DISSERTATIONS 89/2016 Field of research Engineering Design and Production Manuscript su...

Tread design has evolved over the years to achieve the common tread pattern used in current vehicles. However, to meet safety and comfort requirements, tread design considers more than one design factor. Tread design must consider the grip and drainage, and the manner in which to reduce rolling noise, which is one of the main factors considered by manufacturers. The main objective of this study...

The equations for wheelchair caster wheel shimmy are presented along with experimental data. The report includes the theory and performance of single wheel casters for a variety of tires, and a new design for wheelchair casters using a grooved dual-tread tire or co-rotating caster wheels. The dual-tread tire was found to significantly inhibit caster shimmy. The turning resistance due to a groov...

Computational fluid dynamics is implemented to investigate the influence of the wheel contact patch on the global car aerodynamics. Two main aspects of the problem are the contact step and patch shape. Three important parameters: step height, cut angle, and tire tread shape are taken into consideration. For validations of the numerical results, the experimental data are also considered. The obt...

The prevalence and severity of latex allergy has increased dramatically in the last 15 years due to exposure to natural rubber products. Although historically this health risk has been elevated in hospital personnel and patients, a recent survey has indicated a significant potential risk for the general population. To obtain a wide-spread source for latex exposure, we have considered tire debri...

For the design of an antenna that will be directly attached to a car tire, the proximity effects due to the tire have to be considered. Measurements are performed on a dipole antenna that is mounted at the inside of the tire tread to determine the change in input impedance and resonant frequency caused by the dielectric rubber material and the metal reinforcement of the tire. A differential mea...