Twenty-four rapidly adapting (RA) cutaneous afferents were recorded from a preparation of isolated, innervated hairy skin from the rat hindlimb for the purpose of identifying the mechanical variables associated with the initiation of afferent discharge. Neurons were studied while the skin was stretched dynamically along a single direction with the use of a linear actuator and a feedback control...

We present atomistic simulations of the tensile and compressive loading of single crystal facecentered cubic (FCC) nanowires with h1 0 0i and h1 1 0i orientations to study the propensity of the nanowires to deform via twinning or slip. By studying the deformation characteristics of three FCC materials with disparate stacking fault energies (gold, copper and nickel), we find that the deformation...

The diaphragmatic muscle tendon is a biaxially loaded junction in vivo. Stress-strain relations along and transverse to the fiber directions are important in understanding its mechanical properties. We hypothesized that 1) the central tendon possesses greater passive stiffness than adjacent muscle, 2) the diaphragm muscle is anisotropic, whereas the central tendon near the junction is essential...

BACKGROUND We hypothesized that using a cadaveric Lisfranc ligamentous injury model, abduction stress would provoke greater post-injury motion than axial weightbearing between the medial cuneiform (MC1) and the base of the second metatarsal (MT2). Second, we hypothesized that both a tensioned suture-button device and a rigid screw fixation method could maintain a reduction and similarly restrai...

In this paper, nonlinear static analysis of moderately thick plate made of functionally graded materials subjected to mechanical transverse loading is carried out using dynamic relaxation method. Mindlin first order shear deformation theory is employed to consider thick plate. Discretized equations are extracted for geometrically nonlinear behavior analysis.Loading Conditions and boundary condi...

objective: the aim of this study was to measure and compare the transverse strength and deflection of two acrylic resins. method and materials: a total of 30 samples, with dimensions of 2.5×10×65mm, were prepared with acropars and meliodent acrylic resins according to ada specification no. 12. the specimens were divided into two groups of 15 samples each. a three-point bending test was carried ...

A cantilever beam is completely fixed at one end and free at the other. In the case of cantilevers, the support conditions in the transverse plane affect the moment pattern. For design purposes, it is convenient to use the concept of notional effective length, k, which would include both loading and support effects. The notional effective length is defined as the length of the notionally simply...

Due to traffic loading and weathering, highway pavements deteriorate starting immediately after construction. Many rehabilitation methods are available to bring deteriorated pavements back to an appropriate level of service for road users. One of these methods, chip seal, has been widely used in many states, including Kansas. This study evaluated the performance of chip seal treatments in Kansa...

This study is to evaluate the behavior of integral and segmental specimens through static and cyclic tests. Integral specimens were made with the same size to be compared with segmental specimens that were made by connected precast members. To evaluate its bending performance and serviceability, 1 integral and 3 segmental specimens were tested under static load. And 1 integral and 2 segmental s...

The paper focuses on optimization of lightweight sandwich panels with prismatic cores subject to bending loads in the two principal in-plane directions. Comparisons are made with optimal designs of panels with corrugated cores: a limiting case. When optimized for loading transverse to the prism axis, prismatic panels outperform those with corrugated cores, especially at lower loads. In contrast...