This article reports studies on the feasibility of increasing the decoloring capacity of a granular activated carbon (GAC) by using oxidation with air at 350 degrees C to modify its surface activity and porosity. The GAC, obtained from olive stones, had a maximum decolorization capacity of 92% for doses of 20 g/l, while the maximum decolorization capacity of the modified granular activated carb...

General thermo-mechanical behavior of composites reinforced by shape memory alloy fibers is predicted using a three-dimensional analytical micromechanical method to consider the effect of fibers activation. Composite due to the micromechanical method can be exposed to general normal and shear mechanical and thermal loading which cause to activate the shape memory alloy fibers within polymeric m...

This study evaluates the performance of a polymeric microfiltration membrane, as well as its combination with a coconut granular activated carbon (GAC) pretreatment, in a gravitational filtration module, to improve the quality of water destined to human consumption. The proposed membrane and adsorbent were thoroughly characterized using instrumental techniques, such as contact angle, Brunauer-E...

Paracetamol adsorption in acidic, neutral and basic media on three activated carbons with different chemistry surfaces was studied. A granular activated carbon (GAC) was prepared from coconut shell; starting from this sample, an oxidized activated carbon (GACo) was obtained by treating the GAC with a boiling solution of 6 M nitric acid, so to generate a greater number of oxygenated surface grou...

Lignite based granular activated carbon of 20x30 mesh size was used to investigate the extent of bioregeneration of phenol and 2,4-DCP in a batch system. The adsorption isotherm fits very well with the Freundlich isotherm and it is apparent that 2,4-DCP is more adsorbable than phenol. The degree of reversible adsorption for phenol and 2,4-DCP were 32.9 and 10.6 %, respectively. The low percenta...

In this study, adsorption of ten environmentally halogenated aliphatic synthetic organic compounds (SOCs) by a pristine graphene nanosheet (GNS) and a reduced graphene oxide (rGO) was examined, and their adsorption behaviors were compared with those of a single-walled carbon nanotube (SWCNT) and a granular activated carbon (GAC). In addition, the impacts of background water components (i.e., na...

The removal of trace organics by a membrane bioreactor-granular activated carbon (MBR-GAC) integrated system were investigated. The results confirmed that MBR treatment can be effective for the removal of hydrophobic (log D>3.2) and readily biodegradable trace organics. The data also highlighted the limitation of MBR in removing hydrophilic and persistent compounds (e.g. carbamazepine, diclofen...

The potential of activated carbons--powdered (PAC) and granular (GAC), for the adsorption of acrylonitrile (AN) at different initial AN concentrations (50<or=C(0)<or=500 mg/l) from aqueous solutions was studied over the temperature range of 303-333 K. The effect of adsorbent dosage, initial AN concentration, contact time, and the change in pH with addition of adsorbents on adsorption was studie...

Articles you may be interested in Solvothermal synthesis of NiAl double hydroxide microspheres on a nickel foam-graphene as an electrode material for pseudo-capacitors Effect of nano-filler on the performance of multiwalled carbon nanotubes based electrochemical double layer capacitors Composite electrodes of activated carbon derived from cassava peel and carbon nanotubes for supercapacitor app...

Electrochemical double layer supercapacitor cells were fabricated and tested using composite electrodes of activated carbon with carbon black and poly(3,4-ethylenedioxythiophene) (PEDOT), and an organic electrolyte 1M TEABF4/PC solution. The effect of PEDOT on the performance of the EDLC cells was explored and the cells were characterised by electrochemical impedance spectroscopy (EIS), cyclic ...