This article reports a study of the thermo-oxidation and biodegradation in the soil of low-density polyethylene/starch films (LDPE/starch) by infrared spectroscopy: Films of LDPE/Starch blends of different composition (starch content range from 0 to 15% w/w),were prepared and exposed to thermo-oxidation at different temperatures at 80, 90 and 100°C,and buried in the soil of public dump duri...

In this study, the effect of surface morphologies on the isothermal oxidation behavior of MCrAlY coatings fabricated by high-velocity oxyfuel (HVOF) processes was investigated. To do so, free standing coatings with as-sprayed and polished surfaces were isothermally oxidized at 1050°C. The thickness of the bond coat was approximately 380μm. The Ra of the as-sprayed and polished surfaces were 6.4...

In the present research, the selective oxidation of lauryl alcohol to lauraldehyde was studied under liquid-liquid phase transfer conditions using potassium chromate (K2CrO4) as an oxidizing agent and tetrabutyl ammonium bromide (TBAB) as the phase transfer catalyst. Chromium (VI) reagents are used in these oxidations since the alcohols are selectively oxidized <e...

Isothermal redox kinetics of as-received Co3O4 (AC), 1 h ball milled Co3O4 (BC), and 1 h ball milled Co3O4-15wt.% Fe2O3 (BCF) was investigated at various temperatures (1130, 1100, 1070, and 1040 °C for reduction and 830, 860, and 890°C for re-oxidation) by thermogravimetric method. It was found that mechanic...

protein oxidationm.longissimus dorsi andm. semimembranosuswas studied in ram lambs of northeastern bulgarian fine wool breed and cross of this breed with ile de france, reared and in doors and on pasture.the degree of protein oxidation is determined by measuring the content of carbonyls, formed during the storage of the investigated muscles at low temperatures(4˚с till6thday and -20˚с till90thd...

titanium aluminide and its alloys have been utilized in automotive, aerospace and power industries because of their specific properties such as low density (~ 4 g/cm3), high melting temperature (~ 1460 °c) and excellent high-temperature strength. ti-48al intermetallic compound and its alloys with 1.5, 3 and 5 at.%mn were produced with mechanical alloying of elemental powders for 50 hours. the p...

The alloy Mo-47Re has favorable mechanical properties at temperatures above 1400 C, but it undergoes severe oxidation when used in air with no protective coating. To shield the alloy from oxidation, platinum cladding has been evaluated. The unprotected alloy undergoes catastrophic oxidation under static and dynamic oxidation conditions. The platinum cladding provides good protection from static...

Chlorine oxoanions with the chlorine atom at different oxidation states were introduced in an attempt to systematically tailor the electronic structures of single-walled carbon nanotubes (SWCNTs). The degree of selective oxidation was controlled systematically by the different oxidation state of the chlorine oxoanion. Selective suppression of the metallic SWCNTs with a minimal effect on the sem...

a fast and simple voltammetric method for the determination of methimazole in pharmaceutical products was reported. a glassy carbon electrode was pretreated by anodization at +1.75 v (vs. sce) for 5 min, followed by potential cycling in the range of 0.3-1.3 v (20 cycles). the pretreated electrode showed an excellent electrocatalytic effect on the oxidation of methimazole. compared with untreate...

we studied the effect of different concentrations of alpha-tocopherol on in vitro cupric ions induced oxidation of low density lipoproteins (ldl). human native ldl (50 µg protein/ml) oxidation was induced by 10 µmol/l of cuso4. conjugated dienes were measured spectrophotometrically for up to 440 minutes. the length of the lag phase (tlag), maximum velocity of the reaction (vmax) and the maximum...