High performance concrete (HPC) bridge decks are prone to premature cracking if movement is restrained. Internal curing (IC) can reduce shrinkage cracking in concrete structures, thus improving their performance and service life. However, there is very limited information available in the literature on the possible extension of service life due to internal curing. This paper addresses this ques...

Abstract Concrete is the most widely used material in construction, which possesses different characteristics and possible manufacturing methods. is, also, characterized by its high resistance to compression durability, factors that could have been directly influenced curing method early ages. The objective of this research demonstrate importance concrete process, as well analyze influence chos...

as it is seen, by passing the evolutionary process of banding of orthodontic attachments to the bonding ones, orthodontics have witnessed many developments, such as application of new adhesives, optimized base designs, new bracket materials, curing methods and more efficient primers. the studies often address the morphological, micro-leakage, and shear bond tests to evaluate bond efficacy. amon...

The promise of enhanced physical properties and multifunctionality has led many groups to study polymer matrix composites (PMCs) reinforced with nanoscale elements, such as nanofibers, nanowires, and nanotubes. However, the application of such material in next-generation aerospace architectures is currently limited by the geometrical constraints and high energy costs of traditional manufacturin...

We examine the influence of heterogeneous curing rates for a SIS model, used for malware spreading on the Internet, information dissemination in unreliable networks, and propagation of failures in networks. The topology structures considered are the regular graph which represents the homogenous network structures and the complete bi-partite graph which represents the hierarchical network struct...

The feasibility of recycling carbon dioxide into concretes through their curing processes was investigated. The CO2 uptake capacities of four commonly used concrete building products: masonry block, paving stone, cement board and fiberboard, were evaluated. It was found that, based on the cement content used in the product, the uptake capacities of the four products ranged from 9.8% to 18.9% wh...

Underfill encapsulant is critical to the reliability of the flip-chip solder joint interconnects. Novel no-flow underfill encapsulant is an attractive flip-chip encapsulant due to the simplification of the no-flow underfilling process. To develop the no-flow underfill material suitable for the no-flow underfilling process of flip-chip solder joint interconnects, we have studied and developed a ...

OBJECTIVE The purpose of this study was to compare the effect of light curing distance on the cytotoxicity of five resin composites cured with three high-power light curing units. STUDY DESIGN Seven cylindrical discs of each material (Grandio®, Voco; Filtek™ Z250, 3M ESPE; Clearfil™ AP-X, Kuraray Co. Ltd.; Aelite™ LS, Bisco Inc. and Simile®, Pentron) were cured. For curing, soft-up mode of qu...

Research in urethane-acrylate UV-curables has shown that these materials have mechanical properties inferior to those of thermoplastic polyurethanes with very similar composition owing to the high cross-link density in UV-curables; in particular, their ultimate extension is low (less than 100%). Past attempts a t increasing the ultimate extension involved compromising the advantages of the UV-c...

The curing of poly(methyl methacrylate) (PMMA) bone cement is done by a free radical polymerization. As the amount of free radicals present is a marker of the amount of unpolymerized chains present in the polymer, it is assumed that this could be related to the mechanical properties such as strength or density. In this study, the direct observation of the free radicals produced during the PMMA ...