the present work reports and discusses the results of a 3d simulation of the injection molding process of a rubber compound that includes the mold flling stage and  material curing, using the computer code is developed in “udf” part of the fluent 6.3 cae software. the data obtained from a rheometer (mdr 2000) is used to characterize the rubber material in order to fnd the cure model parameters ...

present research involves the complete simulation of pultrusion manufacturing process of glass/polyester composites. for that purpose, the curing process is divided to two liquid and gel-solid phases. the physical characteristics of the resin consist of specific heat, viscosity and coefficient of heat transfer changes with variations of temperature and increasing the degree of curing process (α...

We commercialized Reactive Coke Agglomerate (RCA), a cement-bonded pellet to decrease the thermal reserve zone temperature for the reduction of the reducing agent rate of blast furnaces. To achieve a high productivity of supplying RCA to large blast furnaces, a rapid curing process of RCA using steam was investigated. We obtained rapid curing of RCA within 18 h by combining primary curing for 1...

To reduce the labor cost and the workload required in the tobacco curing process, an intelligent tobacco curing control technique adopting color identification of the tobacco leaves is proposed. The HSI color space is used in color segmentation and the color recognition with fuzzy decision is used in the curing process. The curing controller can identify the curing stage by the color features o...

in this article the transient heat transfer in rubber parts has been studied. this study is usefull for estimation of the minimum curing time of the rubber parts and thereby to ensure the quality of the rubber. also is the temperature distribution during the rubber curing is well know, then the curing time could accurately be estimated, which will lead to a better curing process. in this regard...

Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...

Concrete is an essential building material which is widely used in construction industry all over the world due to its compressible strength. Curing of concrete plays a vital role in durability and other performance necessities. Improper curing can affect the concrete performance and durability easily. When areas like scarcity of water, structures is not accessible by humans external curing can...

A prediction method for rubber curing process has historically received considerable attention in manufacturing process for rubber article with relatively large size. In recent years, there exists increasing demand for simulation driven design which will cut down the cost and time required for product development. In case of the rubber with relatively large dimensions, low thermal conductivity ...

We present a printable interdigital structure, integrated into the surface of a component, to monitor the curing of two adhesively joint components during the fabrication process. In the factory of the future there is a need of new sensor concepts beside the information technological infrastructure. Monitoring of the fabrication enables automated control of the process which improves the qualit...