A promising electrochemical sensor was fabricated by the self-assembling of Pt nanoparticles (nano-Pts) on a chitosan (CS) modified glassy carbon electrode (GCE). A field-emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM) and electrochemical techniques were used for characterization of these composites. It has been found that nano-Pts are inserted into the CS...

Covalent grafting of chromotropic acid (CA) moiety to a glassy carbon electrode was performed by electrochemical reduction of the corresponding diazonium cation generated in situ. Grafted electrodes were subjected to the electrochemical detection of multivalent cations using Fe(CN)(6)(3-/4-) as an electrochemical probe molecule. In the absence of metal cations, redox reaction of the anionic p...

The adsorbate structures on electrode surfaces in an electrochemical environment are controlled by thermodynamic parameters such as temperature, concentration, pH and electrode potential. Knowledge of these structures is important as specifically-adsorbed ions on an electrode impact catalytic reactions that take place at the electrode-electrolyte interface. From a theoretical point of view, the...

An alumina surface coating is demonstrated to improve electrochemical performance of MoO(3) nanoparticles as high capacity/high-volume expansion anodes for Li-ion batteries. Thin, conformal surface coatings were grown using atomic layer deposition (ALD) that relies on self-limiting surface reactions. ALD coatings were tested on both individual nanoparticles and prefabricated electrodes containi...

Tremendous efforts have been dedicated into the development of high-performance energy storage devices with nanoscale design and hybrid approaches. The boundary between the electrochemical capacitors and batteries becomes less distinctive. The same material may display capacitive or battery-like behavior depending on the electrode design and the charge storage guest ions. Therefore, the underly...

The variables affecting determination of ultra trace levels of uranium (VI) in aqueous samples by differential pulse cathodic stripping voltammetry were examined in detail using Hg-thin film modified carbon paste and multiwall carbon nanotube (MWCNT) incorporated carbon paste electrode. Carbon paste electrode prepared in the laboratory was modified with Hg thin film and used as the working elec...

This study reports a multifunctional electrode approach which directly implements electrokinetic enhancement on a self-assembled-monolayer-based electrochemical sensor for point-of-care diagnostics. Using urinary tract infections as a model system, we demonstrate that electrokinetic enhancement, which involves in situ stirring and heating, can enhance the sensitivity of the strain specific 16S ...

A thin-film electrochemical sensor electrode capable of electrolytic conductivity, cyclic voltammetry, and temperature measurements of electrolyte solutions has been fabricated and characterized. The electrode fabrication and calibration is detailed, showing accuracies of 6 % for electrolytic conductivity measurements over the range of 0.1–100 mS cm 1 and temperature measurement within 2 C from...

Tungsten (W) was coated onto a silicon (Si) anode at the nanoscale via the physical vaporization deposition method (PVD) to enhance its electrochemical properties. The characteristics of the electrode were identified by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis, and electron probe X-ray microanalysis. With the electrochemical pr...