Cl2, Br2, HBr, Br2/Cl2, and HBr/Cl2 feed gases diluted in Ar (50%–50% by volume) were used to study etching of p-type Si(100) in a rf inductively coupled, Faraday-shielded plasma, with a focus on the photo-assisted etching component. Etching rates were measured as a function of ion energy. Etching at ion energies below the threshold for ion-assisted etching was observed in all cases, with Br2/A...

Quite recently, ion-track membranes of poly(vinylidene fluoride) (PVDF) have attracted a renewed interest for their applications to next-generation electrochemical devices such as fuel cells [1,2]. In order to produce tracketched pores in PVDF films, several kinds of etching solutions were previously employed. In most cases [3], a highly concentrated aqueous KOH solution with a KMnO4 additive w...

This paper deals with the theoretical modeling of surface reflectance of acid textured multicrystalline wafer used in the processing of solar cell to minimize the surface reflectivity and there by enhancing the efficiency of the cell without wasting the wafers and time in optimizing the texturization process for the development of high efficiency solar cell. In the present study, texturization ...

There has been a great deal of work on the formation of hard white-etching regions in conventional bearing steels such as 1C-1.5Cr wt% when subjected repeatedly to rolling contact stresses. The regions are a consequence of localised mechanical attrition across microcrack faces and mixing, which refine the local structure and force cementite to dissolve. This white-etching matter is often associ...

We report a simple, clean, and highly anisotropic hydrogen etching method for chemical vapor deposited (CVD) graphene catalyzed by the copper substrate. By exposing CVD graphene on copper foil to hydrogen flow around 800 °C, we observed that the initially continuous graphene can be etched to have many hexagonal openings. In addition, we found that the etching is temperature dependent. Compared ...

The morphological characteristics of metal nanoparticles, particularly the shape, play an essential role in the optical, physical and chemical properties. In this work, we reported a transverse etching process to investigate the morphological variations of single gold nanorods (GNRs). Dark-field microscopy and Rayleigh scattering spectroscopy were used as complementary technologies to track the...

Solution casting using a sacrificial template is a simple technique to fabricate vertical arrays of polymer nanotubes. However, because of their close proximity and high aspect ratios, large capillary forces cause nanotubes to cluster as the array dries; researchers often use special drying techniques to avoid this clustering. Here, we exploit the clustering of regioregular poly(3-hexylthiophen...

OBJECTIVE The purpose of this study was to evaluate the effect of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on the shear bond strength (SBS) of brackets bonded to non-demineralized teeth with either phosphoric acid etching or self-etching primer. METHODS Sixty human premolars were randomly assigned to 1 of 4 treatment groups (n = 15 each): phosphoric acid etching (group 1); ...

Chemical etching is widely applied to texture the surface of sputter-deposited zinc oxide for light scattering in thin-film silicon solar cells. Based on experimental findings from the literature and our own results we propose a model that explains the etching behavior of ZnO depending on the structural material properties and etching agent. All grain boundaries are prone to be etched to a cert...

Solid-state nanopore has captured the attention of many researchers due to its characteristic of nanoscale. Now, different fabrication methods have been reported, which can be summarized into two broad categories: "top-down" etching technology and "bottom-up" shrinkage technology. Ion track etching method, mask etching method chemical solution etching method, and high-energy particle etching an...