In this paper, electromagnetic modeling of capacitors and inductors for printed electronic circuits is studied. Capacitors are successfully modeled by two-dimensional finite element software. Capacitive sensor for chemical detection is proposed and tested in water. Inductors are modeled by the integrating through the currents and obtained results have been compared with 3D finite element method...

The purpose of introducing ultrasonic vibrations in the tube hydroforming process is to create more formability by obtaining a lower corner radius, improve thickness distribution of the wall and provide good tribological conditions at the tube and the die interface. Vibrations imposed on the die create alternating gaps which improve the formability in the tube hydroforming process in the presen...

Anode activity in vacuum arc plays a very important role in both characteristics of vacuum arc and the interruption capacity of vacuum interrupters. In this paper, the transient thermal processes of anode in vacuum arc in a half of arc current cycle with frequency of 50 Hz are simulated by finite element analysis software, ANSYS. Some important phenomena of anode, e.g., the melt and solidificat...

Reinforced concrete structures consists of two main components and the behavior of these structures influenced by gender and material properties, in order to investigate the behavior of concrete reinforced beam that most important flexural element in reinforced concrete structures, we chosen High Strength Concrete (HSC) for concrete and GFRP and steel bars for reinforcement. For compare the new...

We consider the parallel factorization of sparse finite element matrices on distributed memory machines. Our method is based on a nested dissection approach combined with a cyclic re-distribution of the interface Schur complements. We present a detailed definition of the parallel method, and the well-posedness and the complexity of the algorithm is analyzed. A lean and transparent functional in...

In the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. In the analytical method, the delaminated beam is modeled as four interconnected Euler–Bernoulli beams and the constrained and free mode models are both simulated. The differential stretching and the bending-extensio...

starting from two-dimensional (2d) equations of motion, discretized formulations for transient behavior of soil-structure interaction problems have been derived. two different dynamic infinite elements taking into account single and two-wave types are presented in transformed space. by coupling the infinite elements with standard finite elements, an ordinary finite element procedure is used for...

in this study, focuses on applying the hp-version for forward modeling. the eit forward solver is normally based on the conventional finite element method (hfem). in h-fem, the polynomial order p of the element shape functions is constant and the element size h, is decreased. to accurately simulate the forward solution with the hfem, a mesh with large number of nodes and elements is usually need...

experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

introduction: excessive temperature rise during drilling of the mandible for dental implant placement might damage adjacent osseous tissues. various factors affect temperature rise, including the geometrical parameters of surgical drills, one of which is the drill bit head angle. the aim of this research was to determine suitable drill bit head angle to induce minimum temperature rise during ma...