Gasoline direct injection provides reduced engine emissions, increased power, and increased fuel economy as compared to port fuel injection (PFI). Reduced emissions are largely due to starting the engine using high fuel pressure (up to 150 bar) and injecting into the compression stroke. During a cold start, fuel pressure must be increased from lift pump pressure (typically 4 to 6 bar) to desire...

In order to solve energy crisis, the search for alternative fuel is extensively important. Alternative fuels selected should be renewable, sustainable and eco-friendly. In India, kerosene is also used as a fuel in cooking stove. Kerosene contains impurities like sulphur, aromatics and hydrocarbons, which causes environmental degradation. In this experimental investigation, blends of ethanol and...

This paper investigates the opportunity of using almond oil as a renewable and alternative fuel source. Different fuel blends containing 10, 30, and 50% almond biodiesel (B10, B30, and B50) with diesel fuel (B0) were prepared and the influence of these blends on emissions and some performance parameters under various load conditions were inspected using a diesel engine. Measured engine performa...

The loading of MOX (Mixed Oxide) fuel in BWRs (Boiling Water Reactors) is considered in this paper in a “once-through” strategy. The fuel assemblies are of the General Electric 8×8 type, whereas the reactor is of the General Electric BWR/6 type. Comparisons with traditional UOX (Uranium Oxide) fuel assemblies revealed that the loading of MOX fuel in BWRs is possible, but this type of fuel creat...

Owing to their high efficiency and energy density, miniaturized fuel cells are an attractive alternative to batteries in the mW-W power generation market for portable consumer and military electronic devices [cf. 1-3]. Hydrogen is being actively considered as a fuel for power generation. It can be supplied either by storage devices or its in-situ generation using reformers. However, safety and ...

A Cummins N14-410 diesel engine was operated on twelve fuels produced by blending methyl tailowate, methyl soyate and ethanol with No.2 diesel fuel. Engine incylinder pressure data were used to evaluate engine performance. Peak cylinder pressures for each fuel blend at all engine speeds were lower than peak pressure for diesel fuel with the exception of the 80 % diesel, 13 % methyl tallowate, a...

This study proposes a fuel consumption estimation system and method with lower cost. On-board units can report vehicle speed, and user devices can send fuel information to a data analysis server. Then the data analysis server can use the proposed fuel consumption estimation method to estimate the fuel consumption based on driver behaviours without fuel sensors for cost savings. The proposed fue...

The idea of a fuel cell was first discovered in 1839 by Christian Friedrich Schönbein [64] and William Grove [27]. Independently from each other they provided the foundation for the development of many different kinds of fuel cells. Today’s fuel cells are mostly classified by the type of electrolyte used in the cells. The most common types are polymer electrolyte fuel cells PEFC (developed by W...

a r t i c l e i n f o The fixed-route vehicle-refueling problem (FRVRP) is a mathematical problem widely used in the U.S. trucking industry. The FRVRP seeks the best refueling policy (sequence of fuel stations to use, along with the fueling quantity at each station) for a given (fixed) origin–destination route that minimizes a vehicle's refueling cost. While effective, the current FRVRP methods...

The iron and steel industry is the second largest user of energy in the world industrial sector and is currently highly dependent on fossil fuels and electricity. Substituting fossil fuels with renewable energy in the iron and steel industry would make an important contribution to the efforts to reduce emissions of CO2. However, different approaches to assessing CO2 emissions from biomass and e...