Electrospinning of nanofibers with cyclodextrin (CD) is attractive because the produced fibers can potentially increase the efficiency of nanofibrous membranes by facilitating the complex formation with organic compounds and high surface area of the nanofibers. In this work, polyacrylonitrile (PAN) nanofibers functionalized with β– cyclodextrin (βCD) during an electrospinning process were used ...

Treatment of textile wastewater using conventional methods is either inefficient or costly. This is because it usually involves reactive dye, great amounts of salt and high temperature. In this study, a bimodal porous silica/(-alumina membrane with improved permeability was tested in dye–salt water separation. The effects of temperature, feed concentration of dye, feed concentration of salt, pH...

The optimum conditions for decolorization of an azo dye, C.I. Reactive Black 5 (RB5) and the kinetic characteristics of manganesed d c c d o f ©

Synthetic organic colourants, the majority of which are recalcitrant in nature, are used in many different manufacturing processes. The dyes are released into the environment in industrial effluents and are highly visible even at low concentrations (< 1 mg/l). Decolorisation of the dye CI Reactive Red 141 was investigated in a laboratory-scale anaerobic baffled reactor (ABR). The results of the...

nanofiltration (nf) has become a widely accepted process not only for producing drinking water but also for recovering wastewater in industrial processes or removing pollutants from industrial wastewater effluent. in the textile industry, the treatment of various dye baths with nf at room temperature have already been studied and was found feasible at lab-scale and pilot scale. the aim of this ...

The present work was directed toward the successful ability of electerocoagulation to remove color from synthetic and simulated textile effluent by aluminum/iron electrodes. Two representative reactive dyes were selected for the synthetic dye system, a black dye alone and mixed dye (black, blue, red, 1:1:1 vol/vol). Several important operating parameters such as electrode material, initial pH(3...

Azo dye Reactive Red 195 was selected for decolourization and degradation studies by Georgenia sp.CC-NMPT-T3. Optimization of parameters for dye decolourization was studied under static anoxic condition. Under optimized condition decolourization of Reactive Red 195 by Georgenia sp.CC-NMPT-T3 was found to be 95.93 % at 50 mg/L within five hours in static anoxic condition. The optimum pH and temp...

background: among different pollutants released into the environment, dyes are considered as one of the most dangerous contaminants. in recent years, magnetic nanomaterials have attracted much attention for their dye removal capacity. the aim of this study was to explore the adsorption kinetics of an anionic dye (reactive orange 13 (ro)) by nife2o4 nanoparticles (nife2o4 nps) under various cond...

Activated carbon prepared from Euphorbia tirucalli L wood (ETAC) by chemical activation with phosphoric acid has been analysed for the removal of Reactive Red and Reactive Blue dyes from aqueous solutions through batch adsorption technique. Lower solution pH favours the adsorption of reactive dyes. The amount of dye adsorbed per unit mass of adsorbent increases with the increase in temperature ...