This paper addresses the Vehicle Routing Problem with Delivery Time Cost. This problem aims to find a set of routes of minimal total costs including the travelling cost and delivery time cost, starting and ending at the depot, in such a way that each customer is visited by one vehicle given the capacity of the vehicle to satisfy a specific demand. In this research, a hybrid metaheuristic approa...

Alumina nanomaterials were synthesized via a solution combustion technique using tris-(acetylacetonato) aluminum(III) complex (1) and tris-(2-formylphenolate) aluminum(III) complex (2) at 600, and 1000 °C for 3h. The obtained data showed that the procedure without using fuel resulted in a better phase and morphology. To investigate the phase formation, powder X-ray diffraction technique was use...

in the present work the recrystallization behavior of deep drawing grade al-killed low carbon steel sheets produced by mobarakeh steel plant (msp) has been studied. salt bath isothermal annealing has been applied to cold rolled samples and the resulted microstrucrures have been compared with the microstructure obtained from the box annealing process in msp. it is found that at 635 and 700ºc the...

Reliable safety critical systems are designed for fault tolerance and impose high dependability with reliability requirements. Scheduling such systems is hard in traditional event triggered systems and becomes difficult as complexity increases. Time triggered systems with timing guaranteed in task activation, avoiding the risk of missing a hard-critical deadline, overcoming the problem of time ...

Highly sensitive, easy-to-fabricate, and low-cost pH sensors with small dimensions are required to monitor human bodily fluids, drinking water quality and chemical/biological processes. In this study, a low-temperature, solution-based process is developed to prepare palladium/palladium oxide (Pd/PdO) thin films for pH sensing. A precursor solution for Pd is spin coated onto pre-cleaned glass su...

Fracture surface of Zircaloy-2 specimens tested under constant crosshead speed in CH3OH/0.4 Vol. %HCI solution with and without selenium (25 ppm) addition was studied. Using a combined process of deformation and annealing, coarse grained material was also obtained and examined. Two modes of stress corrosion crack propagation were observed: an intergranular zone caused by stress assisted anodic ...

in this study, the effects cold rolling and annealing parameters during thermomechanical processing of the aisi 201ln stainless steel were investigated. the cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °c was carried out to...

In this study, the Mo-electrode thin films were deposited by a two-stepped process, and the high-purity copper indium selenide-based powder (CuInSe2, CIS) was fabricated by hydrothermal process by Nanowin Technology Co. Ltd. From the X-ray pattern of the CIS precursor, the mainly crystalline phase was CIS, and the almost undetectable CuSe phase was observed. Because the CIS powder was aggregate...

This contribution highlights correlation between the surface concentration of a chemisorbed organophosphorous probe (flavin mononucleotide) and the relative hydroxyl surface coverage of nanostructured ITO electrodes, which can be tuned during post-deposition reductive annealing. The resulting modified electrodes are very stable in aqueous solution, highly hydrophilic and fully-accessible to the...

—In this paper, we present a solution method for examination timetabling, consisting of two phases: a constraint programming phase to provide an initial solution and a simulated annealing phase with Kempe chain neighborhood. The second phase is equipped with some refined mechanisms that help to determine crucial cooling schedule parameters. We perform preliminary experiments of the algorithm on...