Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...

Titanium alloys have found increased applications in various industrial sectors. One of the critical issues in quality control is the weld penetration during welding. In the present paper, tungsten inert gas (TIG) welding of Ti-6Al-4V alloy with and without an activating flux was conducted. The effect of the activating flux on Ti alloy welding was investigated. A data acquisition system was use...

The lap shear strength of chromic acid anodized, primed, Ti-6Al-4V alloy bonded with a high performance FM-5 polyimide adhesive has been investigated as a function of thermal treatment for selected times at various temperatures in air. The research findings indicate that the lap shear strength decreases with the increase in duration of the thermal treatment at constant temperature and with the ...

The biocompatibility of two different titanium alloys, Ti-6Al-4V ELI and Ti-5Al-2, 5Fe, and pure titanium were evaluated. The results were as follows: 1) Titanium alloys were implanted into the dorsal subcutaneous tissues of the Hartley guinea-pig for 12 weeks, immersed in calf serum or in Ringer's solution for 8 weeks. The surface changes of the titanium alloys were observed by SEM and the che...

Dissimilar Ti–Al laser weldings are very interesting due to their difficulties in being processed because of the different physical properties alloys and crack formations during cooling solidification. In this study, effect offset defocusing on microstructure, geometry mechanical response 2 mm thick dissimilar AA6061/Ti-6Al-4V welds was analyzed. Moreover, order reduce residual stresses, joints...

A thin-wall structure composed of Ti-6Al-4V has been deposited using direct laser deposition (DLD) from blended Ti, Al, and V elemental powders. The microstructure and composition distribution along the build height direction were intensively investigated using optical microscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), and Vickers hardness testing. The micr...

Microstructure, chemical and phase composition of the hard layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy (LM), X-ray diffraction (XRD) and analytical scanning, transmission and scanning transmission electron microscopy (SEM, TEM, STEM), electron diffraction and focused ion beam (FIB). Advanced electron microscopy techniques used for una...

OBJECTIVE The purpose of this study was to determine the microtensile bond strength of various resin composite/adhesive systems to alumina particle abraded Ti-6Al-4V substrate after aging for 24h, 10 days, and 30 days in distilled water at 37 degrees C. METHODS Four laboratory resin composite veneering systems (Gradia, GR; Solidex, SOL; Ceramage, CER; and Sinfony, SF) were bonded to 25 mm dia...