The phase field method integrates the Griffith theory and damage mechanics approach to predict crack initiation, propagation, and branching within one framework. No crack tracking topology is needed, and complex crack shapes can be captures without user intervention. In this paper, a detailed description of how the phase field method is implemented with explicit dynamics into LS-DYNA is provide...

Mechanism of fatigue crack initiation was investigated in ultrafine-grained (UFG) magnesium alloy AZ91 processed by equal channel angular pressing (ECAP). Fatigue behaviour of UFG material was compared to the behaviour of material in an initial as-cast state. Focused ion beam technique (FIB) was applied to reveal the surface relief and early fatigue cracks. Two substantially different mechanism...

We analyze the initiation and propagation of a crack from a point on the surface of a circular notch-tip in an impact loaded prenotched plate. The material of the plate is assumed to exhibit strain hardening, strain-rate hardening, and softening due to the rise in temperature and porosity. The degradation of material parameters due to the evolution of damage in the form of porosity is considere...

The fatigue crack growth in a coarse-grained Fe-2 wt% Si alloy is investigated in considerable detail. At room temperature, the material is quasi-brittle and the failure mode is mixed cleavage. Under a mode-I cyclic loading, the crack can overcome the barrier effect of grain boundaries, which dominates the overall damage evolution. Associated with the geometrically necessary crack front branchi...

A novel method for preparing and testing bending specimens in-situ the TEM has been developed. This method provides high visibility of the crack front and its associated plastic zone. This is significant because energy release rates can now be calculated at many points throughout the test based on crack tip opening displacement (CTOD), crack opening angle (COA), and crack advance. Further refin...

Herein, the chloride-induced stress corrosion cracking (SCC) mechanisms of UNS S32205 duplex stainless steel (DSS) reinforcing bars in alkaline and carbonated solutions are studied. Electrochemical monitoring mechanical properties were tested using linear polarization resistance electrochemical impedance spectroscopy, coupled with slow strain rate tensile test (SSRT) to evaluate SCC behavior un...

Recent experimental and computational work by Link and associates has demonstrated that relatively small (W = 150 mm) single edge notched tension specimens (SE(T)) can be used to obtain crack arrest data high in the ductile-to-brittle transition of ferritic structural steel using dynamic computational techniques if a thermal gradient is utilized to aid in the crack arrest. Testing has been repo...

ÐGamma-TiAl based alloys have recently received attention for potential elevated temperature applications in gas-turbine engines. However, although expected critical crack sizes for some targeted applications (e.g. gas-turbine engine blades) may be less than 0500 mm, most fatigue-crack growth studies to date have focused on the behavior of large (on the order of a few millimeters) through-thick...

α/β titanium alloys are choice materials for aeronautical and automotive industries due to their high performance to density ratio. For several applications, fatigue resistance is one of the critical design parameter. Particularly, initiation of fatigue crack plays a key role. Furthermore, hardly anything can be found in the literature on the fatigue crack initiation in multiphase microstructur...

Hydraulic fracturing of a roof can attenuate the strong mineral pressure and stress transfer by creating series parallel artificial fractures in it, different forms hydraulic have effects on attenuation effect coal rock system. In this regard, study investigated influence law pre-cracks mechanical properties rock–coal combined body through PFC2D numerical simulation, following conclusions were ...