NCM523 || graphite lithium ion cells operated at 4.5 V are prone to an early “rollover” failure, due electrode cross-talk, that is, transition metal (TM = Mn, Ni, and Co) dissolution from deposition graphite, subsequent formation of Li dendrites, and, in the worst case, generation (micro-)short-circuits by dendrites growing cathode. Here, impact different separators on high-voltage performance ...

In this work we report preparation TiO2 hollow spheres and its application as an electrochemical sensor. Therefore the novel carbon paste electrode modified with TiO2 hollow spheres (TOHS), multi-walled carbon nanotubes (MWCNTs) and poly-glutamic acid (PGA) film (PGA/TOHS/MWCNTs/CPE) was used for simultaneous determination of dopamine (DA) and piroxicam (PRX) in the presence of ascorbic acid (A...

Dielectric: materials commonly used as insulators in spark gaps (Lexan, Nylon, Lucite, Macor, Boron Nitride, Delrin and G-10) have been exposed to the by-products of arcs in three different spark gap experiments. The first was a 60 kV, 0.05 Caul/shot spark gap using copper-tungsten or graphite electrodes at various pressures of N2 or SF6 gas. The second was a 5-30 kV, 4-25 kA, .l-.6 Coul/shot, ...

OBJECTIVE To develop a coated electrode of immobilized denitrificants and to evaluate the performance of a bioelectrochemical reactor to enhance and control denitrification. METHODS Denitrifying bacteria were developed by batch incubation and immobilized with polyvinyl alcohol (PVA) on the surface of activated carbon fiber (ACF) to make a coated electrode. Then the coated electrode (cathode) ...

We demonstrate novel graphite-on-paper piezoresistive devices. The graphite was used as sensing component. The fabrication process can be finished in a short time with simple tools (e.g., a scissor and a pencil). A small array of six paper-based piezoresistive devices is made. The whole device is flexible. The test results showed that the change of resistance was proportional to the applied for...

The nature and composition of the surface of pyrolytic graphite and the consequent possible effects, when the material is used as an electrode. are considered on the basis of the structure of the graphite and of the handling and/or treatment to which the electrodes may have been exposed. Because of the relatively limited studies on pyrolytic graphite, certain aspects of the behavior of other ty...

Thanks to their high energy density, light weight and long cycle life, rechargeable lithium ion batteries (LIBs) have become one of the dominant power sources for portable electronic devices. With the growing need for higher capacity and safety, numerous efforts have been made to develop alternative high-performance electrode materials for next-generation LIBs. As an example, the anode electrod...

In this work, ceramic hollow fiber supported polydimethylsiloxane (PDMS) composite membranes were developed by dip-coating PDMS layer on the surface of macroporous ceramic hollow fiber support. By controlling the properties of polymer solution and ceramic hollow fiber, high-quality ceramic hollow fiber supported PDMS composite membranes were fabricated for pervaporation (PV) recovery of biobuta...

We investigate four-wave mixing in hydrogen gas using a gas cell and a hollow fiber for the generation of high-energy, multicolor femtosecond (fs) optical pulses. Both a hydrogen-filled gas cell and hollow fiber lead to the generation of multicolor fs pulses in a broad spectral range from the deep ultraviolet to the near infrared. However, there is a difference in the energy distribution of the...