Thin-walled workpieces, such as aero-engine blisks and casings, are usually made of hard-to-cut materials. The wall thickness is very small and it is easy to deflect during milling process under dynamic cutting forces, leading to inaccurate workpiece dimensions and poor surface integrity. To understand the workpiece deflection behavior in a machining process, a new real-time nonintrusive method...

Abstract—Water miscible cutting fluids are conventionally used to lubricate and cool the machining zone. But issues related to health hazards, maintenance and disposal costs have limited their usage, leading to application of Minimum Quantity Lubrication (MQL). To increase the effectiveness of MQL, nanocutting fluids are proposed. In the present work, water miscible nanographite cutting fluids ...

Surface roughness is a result of the cutting parameters such as: cutting speed, feed per tooth and the axial depth of cut, also the tool’s geometry, tool’s wear vibrations, etc. Moreover, the surface finish influences mechanical properties such as fatigue behaviour, wear, corrosion, lubrication and electrical conductivity and the combination of cutting parameters influence the power consumption...

Optimization of cutting parameters is valuable in terms of providing high precision and efficient machining. One of the effects of cutting force in the end milling operation with low diameter tool (during metal cutting) is tool deflection. Assuming that machining errors mostly arise from tool deflection, attempt was made to optimize machining parameters using Genetic Algorithm (GA) so as to min...

Computer Numerically Controlled (CNC) machining of splitblock waveguide circuits has become the primary method of constructing terahertz waveguide circuits. The majority of these circuits have been made on traditional CNC machining centers or on custom-made laboratory machining systems. At both the University of Arizona and Arizona State University, we have developed techniques for machining sp...

The quality of machined workpieces, particularly precious metals, is the main goal of every machining process. A suitable cutting fluid can substantially affect the machining outcome. The study is novel in that it uses nanofluids in the machining process to mitigate the adverse effects of high temperatures and friction. Graphene oxide (GO) nanoparticles were synthesized using the modified Humme...

ultrasonic assisted drilling (usd) is new technique to drill difficult to machine materials. in this method, tool or workpiece vibrates with amplitude of few microns in addition to conventional drill bite rotation. in this experimental research, the bone was drilled both conventionally and using uad, then the thrust was measured in two methods at feed rates of 50, 75 and 125 mm/s and 500, 710 a...

aluminium matrix composites (amcs) materials are continuously displacing traditional engineering materials because of their advantages of high stiffness and strength over homogeneous material formulations. properties of amcs can be tailored to the demands of different industrial applications by suitable combinations of matrix, reinforcement and processing route. presently, several grades of amc...

turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. in order to obtain desired surface quality by machining, prope...