the present work studied the application of membrane bioreactor (mbr) for tapioca wastewater processing that contained chemical oxygen demand (cod) ranging from 4000-9000 mg/l. a preliminary study was initially conducted in order to evaluate membrane performance with respect to its flux with mlss concentration ranging from 4,500 to 10,500 mg/l. it was clear that fouling was observed during the ...

This paper deals with the results from experiments concerning the effects of an increasing shear rate at the edge of the membrane on reducing concentration polarization and on controlling membrane fouling during filtration of river water. Concentration polarization of humic substances in NF and MF membranes can be reduced by increasing the shear rate. The concentration polarization model can pr...

Membrane fouling persists to be among key obstacles in liquid membrane-based separation processes, and thereby the underlying understanding has actively been pursued. The two gaps attempted addressed here are namely, (i) internal fouling, which limited studies due limitations of instruments available; (ii) by mixtures oppositely charged particles, as an extension on effect surface charge pure f...

Organic conditioning films have been shown to alter properties of surfaces, such as hydrophobicity and surface free energy. Furthermore, initial bacterial adhesion has been shown to depend on the conditioning film surface properties as opposed to the properties of the virgin surface. For the particular case of nanofiltration membranes under permeate flux conditions, however, the conditioning fi...

The effect of pH on membrane fouling in a submerged membrane bioreactor (MBR) was investigated in this study. It was found that, pH increase slightly increased the resistance of virgin membrane and fouled membrane. Pore clogging resistance was quite low, which was not apparently affected by the pH variation. Lower pH resulted in higher adherence of sludge flocs on membrane surface. Thermodynami...

This paper compares the difference in membrane flux between direct membrane filtration and coagulation-membrane filtration, and investigates the removal of organics of different molecular weight by coagulation-membrane filtration process, in turn studies the fouling removal mechanism of coagulation process. The results indicate that for COD removal from raw water, coagulation is effective mainl...

This study investigates the performance of ultrafiltration (UF) by membranes coated with titanium dioxide (TiO2) photocatalyst under ultraviolet (UV) illumination in removing natural organic matter (NOM) and possibly in reducing membrane fouling. Experiments were carried out using heat-resistant ceramic disc UF membranes and humic acids as model substances representing naturally occurring organ...

We investigated effects of microfiltration (MF) on heat transfer fouling tendencies of thin stillage. A stainless steel MF membrane (0.1 micron pore size) was used to remove solids from thin stillage. At filtration conditions of 690kPa, the MF process effectively recovered total solids from thin stillage. Thin stillage was concentrated from 7.0% to 22.4% solids with average permeate flux rates ...

Background and Objectives: One of the problems in juice membrane clarification is the accumulation and deposition of rejected compounds on membrane surfaces or inside its pores which results in a membrane fouling. Materials and Methods: Several parameters can have influence on fouling in one hand and prediction of juice permeates flux during the membrane processing is of importance in indust...

Managing the wastewater discharged from oil and shale gas fields is a big challenge, because this kind of wastewater is normally polluted by high contents of both oils and salts. Conventional pressure-driven membranes experience little success for treating this wastewater because of either severe membrane fouling or incapability of desalination. In this study, we designed a new nanocomposite fo...