In this study, 8 novel pyrazole disperse dyes which were synthesized in our previous work [1] applied to polyethylene terephthalate (PET), poly (lactic acid) (PLA) and polyamide 6.6 (PA 6.6) fiber fabrics their colorimetric fastness properties evaluated. The measured a*, b* hue angle (ho) values of all dyed exhibited yellow, orange red colour shades. Quite high strength (K/S) particularly for c...

PURPOSE The aim of this study was to compare the flexural strength of polymethyl methacrylate (PMMA) and bis-acryl composite resin reinforced with polyethylene and glass fibers. MATERIALS AND METHODS Three groups of rectangular test specimens (n = 15) of each of the two resin/fiber reinforcement were prepared for flexural strength test and unreinforced group served as the control. Specimens w...

This study deals with confirmation of the experimentally measured cooling/solidification time Polyethylene Terephthalate (PET) melt by ANSYS and FORTRAN analysis programs. Therefore, a new code was written run using programming. With Thermal Transient module, cooling injection conditions PET into cylindrical mold were simulated. Then, experimental results data compared. It determined that are i...

Today, the economic consumption of biodegradable polymers is of capital importance in many applications. One of the most commonly used biopolymers is polylactic acid (PLA). The printability of the biodegradable film has not been fully investigated. This work tested the printability of polylactic acid (PLA) films and compared the print qualities to common packaging films like low density pol...

Slow multiply charged ions are efficiently guided through nano-capillaries with large aspect ratio in polyethylene terephthalate (PET), due to self-organized charging of the inner capillary walls which prevents close collisions with the surface. In order to gain more insight into this interesting phenomenon we have measured the 2-D scattering distribution of transmitted ions during the charge-u...

The use of 3D printers for manufacturing processes comes with the challenge filament replacement subsequent processes. This aforementioned including environmental problems posed by plastics wastes formed basis current work which is focused on design and construction a simple single extruder production filaments from waste polyethylene terephthalate (PET) rapid prototyping machines printers. Thr...

monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...

Parallel fibers can be rapidly created by manually brushing solvated polymer solutions over arrays of microfabricated pillars. Recently, this technique has been utilized to produce suspended arrays of micron and sub-micron scale fibers consisting of a new triblock copolymer composed of a hydrophilic mid-block of polyethylene oxide (PEO) surrounded by two hydrophobic end groups of poly-L-lactic ...

Polymer fiber drawing creates fibers with enhanced thermal conductivity and strength compared to bulk polymer because drawing aligns the molecular chains. I optimize the polymer fiber drawing method in order to achieve polymer fibers that are drawn to lengths exceeding 1cm and develop a method to cut and store them for future experimental purposes. With lengths exceeding 1cm, starting with leng...