A study has been carried out to determine the effect of coating two commercial glass-ionomer cements in either petroleum jelly or wax. After coating, specimens were stored in water for 24 or 168 hours, then the coating removed and the surface examined. Coating in wax was found to increase the surface hardness significantly compared with the uncoated control, whereas coating the specimens in pet...

The purpose of this work was to develop a practical scale-up model for a solvent-based pan-coating process. scale up of adsorption column Practical scale-up rules to determine. ABSTRACT: Although significant progress had been made in developing general scale-up rules for an aqueous pan-coating process, there. Practical scale-up rules to determine the key parameters pan load, pan speed, spray ra...

Tongue diagnosis in traditional Chinese medicine (TCM) assesses the health by investigation of tongue coating. The science and technology of tongue coating analysis have become a significant issue for modernization of TCM. The relationship between microecology of tongue coating and TCM was relevant to the syndrome differentiation in TCM, such as the cold/hot syndrome may exhibit different speci...

High velocity oxy-fuel (HVOF)coating have shown high resistance to corrosion in fossil energy applications and it is generally accepted that mechanical failure, e.g. cracking or spalling, ultimately will determine coating lifetime. The use of HVOF thermal spray to apply coatings is one of the most commercially viable and allows the control of various parameters including powder particle velocit...

Technology assessment is a vital part of decision process in manufacturing, particularly for decisions on selection of new sustainable manufacturing processes. To assess these processes, a matrix approach is introduced and sustainability assessment models are developed. Case studies show that the matrix-based approach provides a flexible and practical way for sustainability evaluation of new ma...

Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...

The outermost nanometres of a poly(vinylidene difluoride) (PVdF) based coil coating have been investigated using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). A reference PVdF based coating formulation and three variations of this formulation were characterised by XPS. The addition of flow agent and/or acrylic co-polymers induced significa...

Impressive gains have been made in thermal spray coatings through material development and coating parameter selection. Nevertheless, it is usually up to shop personnel to develop a robot program to achieve the final coating. Coating programs are often developed using trial and error. Some motion and deposit analysis programs are available [1], [2]. However, they can be costly and require a lev...

OBJECTIVE The purpose of this study was to evaluate the effect of tooth coating material and finishing agent on bleached enamel surfaces after using KTP laser with 27% hydrogen peroxide. BACKGROUND DATA There have been few reports on the effects of tooth coating materials and finishing agents after bleaching. METHODS After 40 crowns of human extracted maxillary incisors were bleached by KTP...