A new anti-corrosion compound, Melamine Formaldehyde (MF), was formulated by the addition of proper amount of formaldehyde to melamine under specific conditions. This compound was mixed with a novel nano powder, which was extracted from corn cob ash containing SiO2 particles, in order to improve its corrosion inhibition efficiency. This inhibitor provides a high level of protection f...

The objective of the paper was to experimentally examine effects corrosion wear on chemical and mechanical properties structural steels. Naturally-progressed testing steel specimens conducted during a period 12 months. Three types steels were tested: mild (grade A), AH32 steel, DH32 steel. Different conditions corrosive environment applied with three dry or water-immersed conditions, namely air...

This study investigates and compares fatigue behavior of forged steel and powder metal connecting rods. The experiments included strain-controlled specimen testing, with specimens obtained from the connecting rods, as well as load-controlled connecting rod bench testing. Monotonic and cyclic deformation behaviors, as well as strain-controlled fatigue properties of the two materials are evaluate...

Abstract. Eddy current testing using a pickup coil is usually applied to the surface detection of cracks because of its high frequency. However, for metal infrastructure, detection of not only the surface but also internal cracks is desired. Therefore, we have developed a low-frequency eddy current testing system to inspect interior structures using a magneto-resistive (MR) sensor with a wide m...

Corrosion tests of 1015 low-carbon steel and two stainless steels (410 and 316L) were conducted in a pure zinc bath (99.98 wt pct Zn) in order to better understand the reaction mechanisms that occur during the degradation of submerged hardware at industrial general (batch) galvanizing operations. Through this testing, it was found that, in general, 316L stainless steel showed the best dissoluti...

Management of Tata Steel, the largest steel making company of India in the private sector, felt the need to develop a framework to determine the levels of ergonomic performance at its different workplaces. The objectives of the study are manifold: to identify and characterize the ergonomic variables for a given worksystem with regard to work efficiency, operator safety, and working conditions, ...

experimental tests were performed to study the seismic behavior and performance ofmodified steel chevron braced frame systems, which incorporate a vertical slotted connection(vsc) detail between the top of the braces and the floor beam above. the vsc detail isintended to prevent vertical load transfer to the beam and limit brace forces to thecompressive resistance of the members. full-scale qua...

Objectives The purpose of this study was to investigate the effect of different types of toothpaste on the frictional resistance between stainless steel brackets and archwires. Materials and Methods Ninety stainless steel orthodontic brackets with stainless steel wires were bonded to bovine teeth and were divided into 6 groups for application of the following toothpastes: Colgate® Total® Adva...