The effects of treating two biopolymers (Trigonella foenum—graceum galactomannan and xanthan gum mixtures) with microwaves ultrasound on the rheological aspects O/W emulsions were investigated. data obtained from steady shear flow fitted various models best chosen due to values R2 RMSE. oscillatory rheology demonstrated that not treated or had viscous-like behavior samples weak gel behavior. fo...

   In this study, effect of asymmetric functionalized graphene oxide (Janus GO) on Young′s modulus and glass transition temperature of Polysulfone (PSf) ultrafiltration membranes was investigated. The membranes were prepared via phase inversion method and GO nanosheets were dispersed in casting solution by sonication. Results showed that the Normalized Young’s modulus (on the basis of neat ...

Viscoelasticity of the leading edge, i.e., the lamellipodium, of a cell is the key property for a deeper understanding of the active extension of a cell's leading edge. The fact that the lamellipodium of a cell is very thin (<1000 nm) imparts special challenges for accurate measurements of its viscoelastic behavior. It requires addressing strong substrate effects and comparatively high stresses...

Oscillatory measurements of a columnar structure were performed, which was formed in an immiscible polymer blend subjected to an electric field. The formation process was observed through a confocal scanning laser microscope and the structure for the measurements was confirmed to be well defined. The storage shear modulus at low frequencies increased with increasing the electric field. A linear...

Nylon 11 (PA11)/clay nanocomposites have been prepared by melt-blending, followed by melt-extrusion through a capillary. Transmission electron microscopy shows that the exfoliated clay morphology is dominant for low nanofiller content, while the intercalated one is prevailing for high filler loading. Melt rheological properties of PA11 nanocomposites have been studied in both linear and nonline...

In the present work, Na+-montmorillonite nanoclay (Na-MMT) was functionalized using 3-aminopropyltrimethoxysilane (3-APTMS) as a coupling agent. The covalent functionalization of MMT was confirmed by Fourier-transform infrared spectroscopy (FT-IR). In the specimen fabrication stage, 5 wt% of pristine MMT or silane-functionalized MMT (f-MMT) were incorporated into an epoxy system and the resulta...

Thermoplastic polyurethane (TPU)/clay nanocomposites were prepared via a melt-compounding method using ester type TPU and two different modified organoclays (Cloisite 30B and Cloisite 15A) in different contents. The Effects of the chemical structure and content of the nanoclays on the thermal degradation and mechanical properties of TPU were also investigated. The effect of structural modificat...

OBJECTIVE The purpose of the study was to measure the viscoelastic properties of four dental resin composite cements using a dynamic mechanical analysis technique. METHODS Dynamic torsional loading was conducted in the frequency range from 1 to 80 Hz. Cement specimens were tested after storage in 37 degrees C water for 24 h. One group was thermal cycled prior to testing. Measurements were tak...