A multilayer aperture antenna array in millimeterwaveband is presented this article. The based on glide-symmetric holey gap-waveguide technology combined with E-plane insertion gaps for a low-cost and low-loss design. radiating part of the formed by an 16 antennas, grouped four sets 2 × subarrays configuration. are fed one-to-four corporate feeding network technology. has been manufactured high...

In this paper, we propose low-loss and broadband terahertz (THz) waveguide-to-coupled microstrip transitions using dipole antenna with directors. The simulation and measurement show that insertion/return loss and bandwidth of the waveguide transition can be improved by adding two directors to the basic dipole antenna. The fabricated transition with two directors on a 50 μm-thick quartz substrat...

A compact series-fed, omnidirectional printed dipole array for millimeter-wave (mm-wave) bands n257, n259, and n261 is proposed. series feed technique with microstrip to grounded-co-planar waveguide (CPW) transition was used the antenna. The prototype fabricated measured range from 27.25 28.5 GHz. peak gain 10.3 dBi a maximum azimuthal ripple of 4.4 dB.

INTRODUCTION A SAR-probe is usually calibrated using a rectangular waveguide with a matching dielectric spacer below 3 GHz [1, 2]. However, the probe diameter is comparable with the aperture size of the waveguide above 3 GHz, and it can deteriorate the accuracy of the calibration. Therefore, an alternative calibration method using a reference antenna in the phantom liquid has been examined [3]....

A planar magnetoinductive (MI) waveguide loaded rectangular microstrip patch antenna is presented and discussed. The MI waveguide consists of two planar metamaterial split squared ring resonators (SSRRs) placed in between two microstrip lines. The backward wave propagation takes place through this structure. The rectangular microstrip patch antenna is magnetically coupled to the MI waveguide. T...

Matching circuits for waveguide-nanoantenna connections are difficult to implement. However, if the waveguide permits only one-way propagation, the matching issue disappears since back-reflections cannot take place; the feed signal is converted to radiation at high efficiency. Hence, a terminated one-way waveguide may serve as an assembly consisting of a waveguide, a matching mechanism, and an ...

• We have experimentally investigated the use of adaptive-focusing techniques in the hyperthermia treatment of cancer. Gradient-search adaptive-focusing software developed at Lincoln Laboratory has been implemented on a commercial microwave hyperthermia planar phased-array antenna system at the University of California at San Francisco (UCSF). The system, manufactured by Labthermics Technologie...