A low cross-polarization slot array antenna in the narrow wall of ridge waveguide is presented. A non-angled slot which is created in the narrow wall of the ridge waveguide is considered to be used as radiating resonant slot. The normalized resistance and normalized reactance curves are presented for design purposes. A six element slot array waveguide antenna with ridges on its narrow wall is t...

Abstract— This work investigates the improvement of the active reflection coefficient of waveguide-fed phased-array antenna using liquid crystal layers. The anisotropy properties of liquid crystal layer can be employed to eliminate blind scan angle and improve the wide angle impedance matching of the waveguide-fed phased array antennas. The authors have expressed the modal analysis of the waveg...

In this research work, a multibeam antenna which is a combination of a beamformer network (BFN) and a linear array antenna, has been designed. A Rotman lens has been chosen as beamformer network and Vivaldi antennas have been selected for constructing array antenna. The Substrate Integrated Waveguide (SIW) was used for implementing Rotman lens. After explanation the structure of Substrate integ...

in this paper, a resonant slotted waveguide array antenna with circular boundary has been designed and simulated for mono-pulse airborne radar applications. the antenna parameters are:11% bandwidth in x-band (8.6-9.6ghz),vswr < 2, 38dbi directivity, sidelobes level of - 20db and 3-db beam-widths of 2.1degree. to design this antenna, it is divided into short sections (sub-arrays) each with a uni...

In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...

this paper describes the design of a 2x2 micro strip patch antenna array in the frequency of 9.5ghz for radar applications, using substrate integrated waveguide, siw, for feeding network. the micro strip patches are aperture-coupled with the feeding network of siw. the feeding network consisting of a perpendicular coax-to-siw transition and two y-junction power dividers. the antenna is simulate...

High-gain and low-profile antennas are required for high-speed wireless communication systems and mechanically-scanning automotive radars in the millimeter-wave band. Waveguide antenna is one of the most attractive planar antennas for such millimeter-wave systems because of its low loss and high efficiency characteristics in high frequency band. Travelling-wave excitation is more effective for ...

In the paper, wideband antenna arrays aimed at microwave imaging applications and SAR applications operating at Ka band were designed. The antenna array feeding network is realized by a low-loss SIW technology. Moreover, we have replaced the large feed network comprised of various T and Y junctions by a simple broadband network of compact size to more reduce losses in the substrate integrated w...

This paper shows injection molded millimeter-wave horn array antenna for the 1-dimensional APAA(Active Phase Array Antenna). The antenna is composed of horn antennas, grooved circular waveguide polarizers, E-plane T-junctions, and E-plane bends employing dielectric waveguides. This structure makes it possible to manufacture a feed circuit and radiating elements as an integrated unit by using in...

A design study has been performed for a lightweight, cylindrical array antenna for a hostile-mortar-locating radar system. A mathematical model of the array was developed which permitted tradeoff studies to be made of various array parameters. Data computed using the model compared very well with experimental and other theoretical data. Critical components of the array were built and tested and...