نتایج جستجو برای: fuel properties
تعداد نتایج: 932399 فیلتر نتایج به سال:
Fatty acids esters were produced from two Nigerian lauric oils, palm kernel oil and coconut oil, by transesterification of the oils with different alcohols using PS30 lipase as a catalyst. In the conversion of palm kernel oil to alkyl esters (biodiesel), ethanol gave the highest conversion of 72%, t-butanol 62%, 1-butanol 42%, n-propanol 42% and iso-propanol 24%, while only 15% methyl ester was...
The objective of this study was to test the performance of diesel engine using diesel B3 mixed with crude palm oil in ratios of 95 : 5, 90 : 10, and 85 : 15, respectively, and to compare the results with diesel B3. According to the tests, they showed that the physical properties of the mixed fuel in the ratio of 95 : 5 were closest to those of diesel B3. The performance of the diesel engine tha...
in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...
in this thesis, structural, electronical, and optical properties of inverse pervskite(ca3pbo) in cubic phase have been investigated.the calculation have been done based on density functional theory and according to generalized gradiant approximate (gga) as correlating potential. in order to calculate the configurations, implementing in the wien2k code have been used from 2013 version. first of ...
To carry out the investigation, a cylinder pressure model was developed based on the position of the crankshaft, engine load, engine speed, and fuel injection time. This model takes into account the maximum number of parameters involved. The accuracy of the model was verified by experimental results. The average error of the cylinder pressure, the average radical of the square of the error of t...
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید