Knowledge of where air flowing across a body transitions from laminar flow to turbulent flow can provide numerous benefits to air vehicle design, thermal protection system design, and air vehicle in-flight control [1]. At the transition between these two flow regimes, a change in body-surface temperature has been measured [2]. The objective of this work is to develop a method to locate and char...

A heat-integrated prefractionator arrangement is studied for a ternary separation of a propane-butanepentane mixture. These types of integrated prefractionator arrangements have large energy savings compared with the best of the direct or indirect sequence with no heat integration. However, a heatintegrated distillation system can be more difficult to control than a non-integrated arrangement, ...

In the current research project, the thermal performance of a series of newly designed mixers has been investigated. Each mixer has two concentric cylinders comprising two annular slot flow channels around a solid cylindrical rod at the center. In each mixer, the first cylinder around the central solid rod has either spherical or pyramidal protrusions throughout the outer surface. It has been o...

The characteristic-based split (CBS) method has been widely used in the finite element community to facilitate the numerical solution of Navier-Stokes (NS) equations. However, this computational algorithm has rarely been employed in the finite volume context and the stabilization of the numerical solution procedure has traditionally been addressed differently in volume-based numerical schemes. ...

Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...

complex heat transfer phenomena (including unsteady state conduction, convection and solidification processes) occur in steel belt conveyer sulfur granulating method. numerical simulation of this technique is performed via a comprehensive and multifaceted one dimensional model. since the air situated between the adjacent sulfur pastilles is essentially stagnant, therefore, the surface temperatu...

Exothermic or heated processes create potentially unsafe work environments for an estimated 5-10 million American workers each year. Excessive heat and process contaminants have the potential to cause acute health effects such as heat stroke, and chronic effects such as manganism in welders. Although millions of workers are exposed to exothermic processes, insufficient attention has been given ...

heat exchangers are one of the most important devices of mechanical systems in modernsociety. most industrial processes involve the transfer of heat and more often they requirethe heat transfer process to be controlled. a heat exchanger is the heat exchanged betweentwo media, one being cold and the other being hot. there are different types of heatexchanger, but the type which is widely used in...

This investigation completed the verification of a three-dimensional resin transfer molding/resin film infusion (RTM/RFI) process simulation model. The model incorporates resin flow through an anisotropic carbon fiber preform, cure kinetics of the resin, and heat transfer within the preform/tool assembly. The computer model can predict the flow front location, resin pressure distribution, and t...

In this research, the effects of parameters include tool rotational and traverse speeds were investigated on heat generation and material flow during friction stir welding of Ti-6Al-4V alloy with computational fluid dynamics (CFD) method. Simulation results showed that with increasing of tool rotational and decreasing tool traverse speed, the more frictional heat generates which causes formatio...